Peiker acustic BTHFCK3 User Manual
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 1 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 1411D5FA
/chry_pdm/chrysler/supplement/uct/su
SECTION PAGE
1
INTRODUCTION
2
Uconnect™ Phone
3
Uconnect™ Multimedia - Video Entertainment System (VES)™
4
Voice Command
5
INDEX
...................................................................103
.............................................................95
TABLE OF CONTENTS
............................................................3
............................................................7
...........................39
1
2
3
4
5
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 2 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 000FE011
/chry_pdm/chrysler/supplement/uct/su
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 3 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 09F577CB
/chry_pdm/chrysler/supplement/uct/su
INTRODUCTION
CONTENTS
m Introduction ...........................4
1
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 4 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 280DDAFE
/chry_pdm/chrysler/supplement/uct/su
4 INTRODUCTION
INTRODUCTION
Acting as the link to the world around you, the available
Uconnect™ systems in your vehicle provide access to
information, entertainment and technology. This
Uconnect™ User’s Manual consists of the follow systems:
•
Uconnect™ Phone
Uconnect™ Phone is a voice-activated, hands-free,
in-vehicle communications system. Uconnect™ Phone
allows you to dial a phone number with your cellular
phone using simple voice commands (e.g., 9Call” {
“Mike” {”Work9 or 9Dial” { “248-555-12129).
•
Uconnect™ Multimedia – Video Entertainment System (VES)™
Video Entertainment System (VES)™ is designed to
give your family years of enjoyment. You can play
your favorite DVDs, watch SIRIUS Backseat TV™ (if
equipped), listen to audio over the wireless headphones and play a variety of standard video games or
audio devices.
•
Voice Command
The Voice Command allows you to control your AM,
FM radio, satellite radio, disc player, and a memo
recorder by just speaking a command.
Whether it’s a trip cross-country or just to the corner
store, Uconnect™ conveniently puts your whole life at
your fingertips.
Ensure that all persons read this manual carefully before
using the Uconnect™ systems shown in this manual. It
contains instructions on how to use the system in a safe
and effective manner.
This manual contains WARNINGS against operating
procedures that could result in an accident or bodily
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 5 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 0DACE1D5
/chry_pdm/chrysler/supplement/uct/su
INTRODUCTION 5
injury. If you do not read the entire manual you may miss
important information. Observe all WARNINGS!
The information given in this manual is subject to
change.
Before operating this Uconnect™ system for the first
time, please read this manual carefully. Note the safety
precautions described in this manual. If you have any
questions, please contact the vehicle manufacturer.
1
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 6 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 000FE011
/chry_pdm/chrysler/supplement/uct/su
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 7 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 1009BBB9
/chry_pdm/chrysler/supplement/uct/su
Uconnect™ Phone
CONTENTS
m Uconnect™ Phone — If Equipped ............8
▫ Operation .......................... 10
▫ Phone Call Features ................... 19
▫ Uconnect™ Phone Features .............. 22
2
▫ Advanced Phone Connectivity ............ 27
▫ Things You Should Know About Your
Uconnect™ Phone..................... 29
▫ General Information ................... 38
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 8 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 30FE98EB
/chry_pdm/chrysler/supplement/uct/su
8 Uconnect™ Phone
Uconnect™ Phone — IF EQUIPPED
Uconnect™ Phone is a voice-activated, hands-free, invehicle communications system. Uconnect™ Phone allows you to dial a phone number with your cellular
phone using simple voice commands (e.g., 9Call” {
“Mike” {”Work9 or 9Dial” { “248-555-12129). Your cellular
phone’s audio is transmitted through your vehicle’s
Any voice commanded system should be used only
in safe driving conditions following local laws and
phone use. All attention should be kept on the
roadway ahead. Failure to do so may result in an
accident causing serious injury or death.(
WARNING!
audio system; the system will automatically mute your
radio when using the Uconnect™ Phone.
NOTE: The Uconnect™ Phone requires a cellular phone
equipped with the Bluetootht9Hands-Free Profile,9 Ve r -
sion 0.96 or higher.
For Uconnect™ customer support and a list of compatible phones, call 1–877–855–8400.
Uconnect™ Phone allows you to transfer calls between
the system and your cellular phone as you enter or exit
your vehicle and enables you to mute the system’s
The Uconnect™ Phone is driven through your
Bluetootht “Hands-Free Profile” cellular phone.
Uconnect™ features Bluetootht technology - the global
standard that enables different electronic devices to connect to each other without wires or a docking station, so
Uconnect™ Phone works no matter where you stow your
cellular phone (be it your purse, pocket, or briefcase), as
long as your phone is turned on and has been paired to
the vehicle’s Uconnect™ Phone. The Uconnect™ Phone
allows up to seven cellular phones to be linked to the
microphone for private conversation.
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 9 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 2CE80321
/chry_pdm/chrysler/supplement/uct/su
Uconnect™ Phone 9
system. Only one linked (or paired) cellular phone can be
used with the system at a time. The system is available in
English, Spanish, or French languages.
Uconnect™ Phone Button
art=010109482.tif NO TRANS
Depending on the vehicle options, either the
radio or the mirror will contain the two control
buttons (Phone
Command
button) that will enable you
Button and Voice
to access the system. When you press the button you will
hear the word Uconnect™ followed by a BEEP. The beep
is your signal to give a command.
The first time the Phone button is pressed during a drive
cycle, the connected phone will be announced. Ex.
“Uconnect™, Jerry’s phone is connected.”
NOTE: If nothing is said within a few seconds, the
system will present a list of menu options. Listen to the
Voice Command Button
art=010109481.tif NO TRANS
Actual button location may vary with the radio. The individual buttons are described in the
“Operation” section.
The Uconnect™ Phone can be used with any Hands-Free
Profile certified Bluetootht cellular phone. See the
Uconnect™ website for supported phones. If your cellular phone supports a different profile (e.g., Headset
Profile) you may not be able to use any Uconnect™
Phone features. Refer to your cellular service provider or
the phone manufacturer for details.
The Uconnect™ Phone is fully integrated with the vehicle’s audio system. The volume of the Uconnect™ Phone
can be adjusted either from the radio volume control
knob or from the steering wheel radio control (right
switch), if so equipped.
choices and give your command after the beep.
2
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 10 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 29A17F52
/chry_pdm/chrysler/supplement/uct/su
10 Uconnect™ Phone
The radio display will be used for visual prompts from
the Uconnect™ Phone such as 9CELL9 or caller ID on
certain radios.
Operation
Voice commands can be used to operate the Uconnect™
Phone and to navigate through the Uconnect™ Phone
menu structure. Voice commands are required after most
Uconnect™ Phone prompts. You will be prompted for a
specific command and then guided through the available
options.
•
Prior to giving a voice command, one must wait for
the beep, which follows the 9Ready9 prompt or another
prompt.
•
For certain operations, compound commands can be
used. For example, instead of saying 9Setup9 and then
9Phone Pairing,9 the following compound command
can be said: 9Setup Phone Pairing.9
•
For each feature explanation in this section, only the
combined form of the voice command is given. You
can also break the commands into parts and say each
part of the command when you are asked for it. For
example, you can use the combined form voice command 9Phonebook New Entry,9 or you can break the
combined form command into two voice commands:
9Phonebook9 and 9New Entry.9 Please remember, the
Uconnect™ Phone works best when you talk in a
normal conversational tone, as if speaking to someone
sitting a few feet/meters away from you.
Voice Command Tree
Refer to “Voice Tree” in this section.
Help Command
If you need assistance at any prompt, or if you want to
know your options at any prompt, say 9Help9 following
the beep. The Uconnect™ Phone will play all the options
at any prompt if you ask for help.
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 11 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 291B9628
/chry_pdm/chrysler/supplement/uct/su
Uconnect™ Phone 11
To activate the Uconnect™ Phone from idle, simply press
the
directions. All Uconnect™ Phone sessions begin with a
press of the button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say 9Cancel9 and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) Uconnect™ Phone to a Cellular Phone –
Non-Touch-Screen Radio Only
To begin using your Uconnect™ Phone, you must pair
your compatible Bluetootht enabled cellular phone.
To complete the pairing process, you will need to reference your cellular phone Owner’s Manual. The
Uconnect™ website may also provide detailed instructions for pairing.
button and follow the audible prompts for
The following are general phone to Uconnect™ Phone
pairing instructions:
•
Press the
•
After the 9Ready9 prompt and the following beep, say
9Setup Phone Pairing.9
•
When prompted, after the beep, say 9Pair a Phone9 and
follow the audible prompts.
•
You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to
enter into your cellular phone. You can enter any
four-digit PIN. You will not need to remember this PIN
after the initial pairing process.
•
For identification purposes, you will be prompted to
give the Uconnect™ Phone a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
button to begin.
2
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 12 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 224691A4
/chry_pdm/chrysler/supplement/uct/su
12 Uconnect™ Phone
•
You will then be asked to give your cellular phone a
priority level between one and seven, with one being
the highest priority. You can pair up to seven cellular
phones to your Uconnect™ Phone. However, at any
given time, only one cellular phone can be in use,
2. Then touch the System Setup soft-key to get to the
System Setup menu.
3. Touch the Phone Pairing soft-key to access the
Bluetootht Devices menu.
art=rer00011.tif NO TRANS
connected to your Uconnect™ Phone. The priority
allows the Uconnect™ Phone to know which cellular
phone to use if multiple cellular phones are in the
vehicle at the same time. For example, if priority three
and priority five phones are present in the vehicle, the
Uconnect™ Phone will use the priority three cellular
phone when you make a call. You can select to use a
lower priority cellular phone at any time (refer to
9Advanced Phone Connectivity9 in this section).
Pair (Link) Uconnect™ Phone to a Cellular Phone –
Touch-Screen Radio Only
1. Press the MENU hard-key on the right side of the
radio.
This menu lists all paired Bluetootht devices.
4. Press the PAIR soft-key to start a new pairing.
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 13 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 12FFB1F0
/chry_pdm/chrysler/supplement/uct/su
art=rer00012.tif NO TRANS
art=rer00013.tif NO TRANS
Uconnect™ Phone 13
2
art=rer00010.tif NO TRANS
5. You can use the BACK soft-key to switch to
the previous menu.
6. Enter any 4 Digit Security PIN and touch the PAIR
soft-key again.
7. The pairing procedure starts. Refer to the user’s
manual of your Bluetootht phone to complete the procedure.
8. You will then be asked to set a priority for the paired
phone. If there is more than one paired phone available,
the navigation radio will try to connect to the phone with
the highest priority setting.
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 14 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 26CA8384
/chry_pdm/chrysler/supplement/uct/su
14 Uconnect™ Phone
Dial by Saying a Number
Press the button to begin.
•
•
After the 9Ready9 prompt and the following beep, say
9Dial.9
•
The system will prompt you to say the number you
want to call.
•
For example, you can say 9234-567-89019.
•
The Uconnect™ Phone will confirm the phone number
and then dial. The number will appear in the display
of certain radios.
Call by Saying a Name
Press the button to begin.
•
•
After the 9Ready9 prompt and the following beep, say
“Call.9
•
The system will prompt you to say the name of the
person you want to call.
•
After the 9Ready9 prompt and the following beep, say
the name of the person you want to call. For example,
you can say 9John Doe,9 where John Doe is a previously stored name entry in the Uconnect™ phonebook
or downloaded phonebook. To learn how to store a
name in the phonebook, refer to 9Add Names to Your
Uconnect™ Phonebook,9 in the phonebook.
•
The Uconnect™ system will confirm the name and
then dial the corresponding phone number, which
may appear in the display of certain radios.
Add Names to Your Uconnect™ Phonebook
NOTE: Adding names to the Uconnect™ phonebook is
recommended when the vehicle is not in motion.
•
Press the button to begin.
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 15 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 25069867
/chry_pdm/chrysler/supplement/uct/su
Uconnect™ Phone 15
•
After the 9Ready9 prompt and the following beep, say
9Phonebook New Entry.9
•
When prompted, say the name of the new entry. Use of
long names helps the voice command and it is recommended. For example, say 9Robert Smith9 or 9Robert9
instead of 9Bob.9
•
When prompted, enter the number designation (e.g.,
9Home,99Work,99Mobile,9 or 9Pager9). This will allow
you to store multiple numbers for each phonebook
entry, if desired.
•
When prompted, recite the phone number for the
phonebook entry that you are adding.
After you are finished adding an entry into the phonebook, you will be given the opportunity to add more
phone numbers to the current entry or to return to the
main menu.
The Uconnect™ phone will allow you to enter up to 32
names in the phonebook with each name having up to
four associated phone numbers and designations. Each
language has a separate 32-name phonebook accessible
only in that language. In addition, if equipped and
supported by your phone, Uconnect™ Phone automatically downloads your cellular phone’s phonebook.
Phonebook Download – Automatic Phonebook
Transfer From Cellular Phone
If equipped and specifically supported by your phone,
Uconnect™ Phone automatically downloads names (text
names) and number entries from the cellular phone’s
phonebook. Specific Bluetootht Phones with Phone Book
Access Profile may support this feature. See Uconnect™
website for supported phones.
•
To call a name from downloaded (or Uconnect™)
Phonebook, follow the procedure in “Call by Saying a
Name” section.
2
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 16 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 28E98062
/chry_pdm/chrysler/supplement/uct/su
16 Uconnect™ Phone
•
Automatic download and update, if supported, begins
as soon as the Bluetootht wireless phone connection is
made to the Uconnect™ Phone, for example, after you
start the vehicle.
•
A maximum of 1000 entries per phone will be downloaded and updated every time a phone is connected
to the Uconnect™ Phone.
•
Depending on the maximum number of entries downloaded, there may be a short delay before the latest
downloaded names can be used. Until then, if available, the previous downloaded phonebook is available
for use.
•
Only the phonebook of the currently connected cellular phone is accessible.
•
Only the cellular phone’s phonebook is downloaded.
•
This downloaded phonebook cannot be edited or
deleted on the Uconnect™ Phone. These can only be
edited on the cellular phone. The changes are transferred and updated to Uconnect™ Phone on the next
phone connection.
Phonebook Download — Single Entry
If equipped and supported by your phone, Uconnect™
Phone allows the user to download entries from their
phone via Bluetootht. To use this feature, press the
button and say “Phonebook Download.” The system
prompts, “Ready to accept “V” card entry via
Bluetootht…” The system is now ready to accept phonebook entries from your phone using the Bluetootht
Object Exchange Profile (OBEX). Please see your phone
Owner’s Manual for specific instructions on how to send
these entries from your phone.
SIM card phonebook is not part of the Mobile phonebook.
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 17 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 1EC82954
/chry_pdm/chrysler/supplement/uct/su
Uconnect™ Phone 17
NOTE:
•
The phone handset must support Bluetootht OBEX
transfers of phonebook entries to use this feature.
•
Some phones cannot send phonebook entries if they
are already connected to any system via Bluetootht,
and you may see a message on the phone display that
the Bluetootht link is busy. In this case, the user must
first disconnect or drop the Bluetootht connection to
the Uconnect™ Phone, and then send the address
book entry via Bluetootht. Please see your phone
Owner’s Manual for specific instructions on how to
drop the Bluetootht connection.
•
If the phonebook entry is longer than 24 characters, it
will only use the first 24 characters.
Edit Uconnect™ Phonebook Entries
NOTE:
•
Editing names in the phonebook is recommended
when the vehicle is not in motion.
•
Automatic downloaded phonebook entries cannot be
deleted or edited.
•
Press the button to begin.
•
After the 9Ready9 prompt and the following beep, say
9Phonebook Edit.9
•
You will then be asked for the name of the phonebook
entry that you wish to edit.
•
Next, choose the number designation (home, work,
cellular, or pager) that you wish to edit.
•
When prompted, recite the new phone number for the
phonebook entry that you are editing.
2
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 18 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 29792D51
/chry_pdm/chrysler/supplement/uct/su
18 Uconnect™ Phone
After you are finished editing an entry in the phonebook,
you will be given the opportunity to edit another entry in
the phonebook, call the number you just edited, or return
to the main menu.
9Phonebook Edit9 can be used to add another phone
number to a name entry that already exists in the
phonebook. For example, the entry John Doe may have a
cellular and a home number, but you can add ”John
Doe’s” work number later using the 9Phonebook Edit9
feature.
Delete Uconnect™ Phonebook Entry
NOTE: Editing phonebook entries is recommended
when the vehicle is not in motion.
•
Press the button to begin.
•
After the 9Ready9 prompt and the following beep, say
9Phonebook Delete.9
•
After you enter the Phonebook Delete menu, you will
then be asked for the name of the entry that you wish
to delete. You can either say the name of a phonebook
entry that you wish to delete or you can say 9List
Names9 to hear a list of the entries in the phonebook
from which you choose. To select one of the entries
from the list, press the
button while the
Uconnect™ Phone is playing the desired entry and say
9Delete.9
•
After you enter the name, the Uconnect™ Phone will
ask you which designation you wish to delete: home,
work, cellular, pager, or all. Say the designation you
wish to delete.
•
Note that only the phonebook entry in the current
language is deleted.
•
Automatic downloaded phonebook entries cannot be
deleted or edited.
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 19 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 251FAAB1
/chry_pdm/chrysler/supplement/uct/su
Uconnect™ Phone 19
Delete/Erase “All” Uconnect™ Phonebook Entries
Press the button to begin.
•
•
After the 9Ready9 prompt and the following beep, say
9Phonebook Erase All.9
•
The Uconnect™ Phone will ask you to verify that you
wish to delete all the entries from the phonebook.
•
After confirmation, the phonebook entries will be
deleted.
•
Note that only the phonebook in the current language
is deleted.
•
Automatic downloaded phonebook entries cannot be
deleted or edited.
List All Names in the Uconnect™ Phonebook
•
Press the button to begin.
•
After the 9Ready9 prompt and the following beep, say
9Phonebook List Names.9
•
The Uconnect™ Phone will play the names of all the
phonebook entries, including the downloaded phonebook entries, if available.
•
To call one of the names in the list, press the
button during the playing of the desired name, and
say 9Call.9
NOTE: The user can also exercise 9Edit9 or 9Delete9
operations at this point.
•
The Uconnect™ Phone will then prompt you as to the
number designation you wish to call.
•
The selected number will be dialed.
Phone Call Features
The following features can be accessed through the
Uconnect™ Phone if the feature(s) are available on your
2
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 20 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 2D50AE62
/chry_pdm/chrysler/supplement/uct/su
20 Uconnect™ Phone
cellular service plan. For example, if your cellular service
plan provides three-way calling, this feature can be
accessed through the Uconnect™ Phone. Check with
your cellular service provider for the features that you
have.
Answer or Reject an Incoming Call - No Call
Currently in Progress
When you receive a call on your cellular phone, the
Uconnect™ Phone will interrupt the vehicle audio system, if on, and will ask if you would like to answer the
call. Press the
call, press and hold the
button to accept the call. To reject the
button until you hear a
single beep, indicating that the incoming call was
rejected.
Answer or Reject an Incoming Call - Call
Currently in Progress
call waiting that you normally hear when using your
cellular phone. Press the
button to place the current
call on hold and answer the incoming call.
NOTE: The Uconnect™ Phone compatible phones in the
market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only answer an incoming call or ignore it.
Making a Second Call While Current Call is in
Progress
To make a second call while you are currently on a call,
press the
button and say 9Dial9 or 9Call9 followed
by the phone number or phonebook entry you wish to
call. The first call will be on hold while the second call is
in progress. To go back to the first call, refer to 9Toggling
Between Calls9 in this section. To combine two calls, refer
to 9Conference Call9 in this section.
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 21 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 376CEC28
/chry_pdm/chrysler/supplement/uct/su
Uconnect™ Phone 21
Place/Retrieve a Call From Hold
To put a call on hold, press the button until you hear
a single beep. This indicates that the call is on hold. To
bring the call back from hold, press and hold the
button until you hear a single beep.
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the
indicating that the active and hold status of the two calls
have switched. Only one call can be placed on hold at a
time.
Conference Call
When two calls are in progress (one active and one on
hold), press and hold the
double beep indicating that the two calls have been
joined into one conference call.
button until you hear a single beep,
button until you hear a
Three-Way Calling
To initiate three-way calling, press the button
while a call is in progress, and make a second phone call,
as described under 9Making a Second Call While Current
Call is in Progress.9 After the second call has established,
press and hold the
beep, indicating that the two calls have been joined into
one conference call.
Call Termination
To end a call in progress, momentarily press the
button. Only the active call(s) will be terminated and if
there is a call on hold, it will become the new active call.
If the active call is terminated by the far end, a call on
hold may not become active automatically. This is cell
phone-dependent. To bring the call back from hold, press
and hold the button until you hear a single beep.
Redial
Press the button to begin.
•
button until you hear a double
2
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 22 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 275B94E3
/chry_pdm/chrysler/supplement/uct/su
22 Uconnect™ Phone
•
After the 9Ready9 prompt and the following beep, say
9Redial.9
•
The Uconnect™ Phone will call the last number that
was dialed from your cellular phone.
NOTE: This may not be the last number dialed from the
Uconnect™ Phone.
Call Continuation
Call continuation is the progression of a phone call on the
Uconnect™ Phone after the vehicle ignition key has been
switched to OFF. Call continuation functionality available on the vehicle can be any one of three types:
•
After the ignition key is switched to OFF, a call can
continue on the Uconnect™ Phone either until the call
ends, or until the vehicle battery condition dictates
cessation of the call on the Uconnect™ Phone and
transfer of the call to the cellular phone.
•
After the ignition key is switched to OFF, a call can
continue on the Uconnect™ Phone for a certain duration, after which the call is automatically transferred
from the Uconnect™ Phone to the cellular phone.
•
An active call is automatically transferred to the
cellular phone after the ignition key is switched to
OFF.
Uconnect™ Phone Features
Language Selection
To change the language that the Uconnect™ Phone is
using:
•
Press the button to begin.
•
After the 9Ready9 prompt and the following beep, say
the name of the language you wish to switch to
English, Espanol, or Francais.
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 23 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 22B2C282
/chry_pdm/chrysler/supplement/uct/su
Uconnect™ Phone 23
•
Continue to follow the system prompts to complete
the language selection.
After selecting one of the languages, all prompts and
voice commands will be in that language.
NOTE: After every Uconnect™ Phone language change
operation, only the language-specific 32-name phonebook is usable. The paired phone name is not languagespecific and usable across all languages.
Emergency Assistance
If you are in an emergency and the cellular phone is
reachable:
•
Pick up the phone and manually dial the emergency
number for your area.
If the phone is not reachable and the Uconnect™ Phone is
operational, you may reach the emergency number as
follows:
•
Press the button to begin.
•
After the 9Ready9 prompt and the following beep, say
9Emergency9 and the Uconnect™ Phone will instruct
the paired cellular phone to call the emergency number. This feature is supported in the U.S., Canada, and
Mexico.
NOTE:
•
The emergency number dialed is based on the country
where the vehicle is purchased (911 for the U.S. and
Canada and 060 for Mexico). The number dialed may
not be applicable with the available cellular service
and area.
•
If supported, this number may be programmable on
some systems. To do this, press the
say ‘Setup’, followed by ‘Emergency’.
button and
2
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 24 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 27311FD2
/chry_pdm/chrysler/supplement/uct/su
24 Uconnect™ Phone
•
The Uconnect™ Phone does slightly lower your
chances of successfully making a phone call as to that
for the cellular phone directly.
NOTE:
•
The towing assistance number dialed is based on the
country where the vehicle is purchased (1-800-5282069 for the U.S., 1-877-213-4525 for Canada, 55-14-
WARNING!
Your phone must be turned on and paired to the
Uconnect™ Phone to allow use of this vehicle feature
in emergency situations, when the cellular phone has
network coverage and stays paired to the Uconnect™
Phone.
Towing Assistance
If you need towing assistance:
•
Press the button to begin.
•
After the 9Ready9 prompt and the following beep, say
9Towing Assistance.9
3454 for Mexico City and 1-800-712-3040 for outside
Mexico City in Mexico). Please refer to the Chrysler
Group LLC 24-Hour 9Towing Assistance9 coverage
details in the Warranty Information Booklet and on the
24–Hour Towing Assistance Card.
•
If supported, this number may be programmable on
some systems. To do this, press the
button and
say “Setup”, followed by “Towing Assistance”.
Paging
To learn how to page, refer to 9Working with Automated
Systems.9 Paging works properly except for pagers of
certain companies, which time out a little too soon to
work properly with the Uconnect™ Phone.
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 25 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 2E149F85
/chry_pdm/chrysler/supplement/uct/su
Uconnect™ Phone 25
Voice Mail Calling
To learn how to access your voice mail, refer to 9Working
with Automated Systems.9
Working with Automated Systems
This method is used in instances where one generally has
to press numbers on the cellular phone keypad while
navigating through an automated telephone system.
You can use your Uconnect™ Phone to access a voice
mail system or an automated service, such as a paging
service or automated customer service line. Some services require immediate response selection. In some
instances, that may be too quick for use of the
Uconnect™ Phone.
When calling a number with your Uconnect™ Phone that
normally requires you to enter in a touch-tone sequence
on your cellular phone keypad, you can press the
button and say the sequence you wish to enter, followed
by the word 9Send.9 For example, if required to enter
your PIN followed with a pound, (3746#),youcan
press the
a number, or sequence of numbers, followed by 9Send,9 is
also to be used for navigating through an automated
customer service center menu structure, and to leave a
number on a pager.
You can also send stored Uconnect™ phonebook entries
as tones for fast and easy access to voice mail and pager
entries. To use this feature, dial the number you wish to
call and then press the
system will prompt you to enter the name or number and
say the name of the phonebook entry you wish to send.
The Uconnect™ Phone will then send the corresponding
phone number associated with the phonebook entry, as
tones over the phone.
NOTE:
•
You may not hear all of the tones due to cellular phone
network configurations. This is normal.
button and say, 93746#Send.9 Saying
button and say, “Send.” The
2
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 26 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 2F19D6FC
/chry_pdm/chrysler/supplement/uct/su
26 Uconnect™ Phone
•
Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
Barge In - Overriding Prompts
The “Voice Command” button can be used when you
wish to skip part of a prompt and issue your voice
command immediately. For example, if a prompt is
asking 9Would you like to pair a phone, clear a...,9 you
could press the
button and say, 9Pair a Phone9 to
select that option without having to listen to the rest of
the voice prompt.
Turning Confirmation Prompts ON/OFF
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the Uconnect™
Phone will not repeat a phone number before you dial it).
•
Press the button to begin.
•
After the 9Ready9 prompt and the following beep, say
9Setup Confirmations.9 The Uconnect™ Phone will
play the current confirmation prompt status and you
will be given the choice to change it.
Phone and Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your cellular phone, the Uconnect™ Phone will provide
notification to inform you of your phone and network
status when you are attempting to make a phone call
using Uconnect™ Phone. The status is given for roaming,
network signal strength, phone battery strength, etc.
Dialing Using the Cellular Phone Keypad
You can dial a phone number with your cellular phone
keypad and still use the Uconnect™ Phone (while dialing
via the cellular phone keypad, the user must exercise
caution and take precautionary safety measures). By
dialing a number with your paired Bluetootht cellular
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 27 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 2C522AA7
/chry_pdm/chrysler/supplement/uct/su
Uconnect™ Phone 27
phone, the audio will be played through your vehicle’s
audio system. The Uconnect™ Phone will work the same
as if you dial the number using voice command.
NOTE: Certain brands of cellular phones do not send
the dial ring to the Uconnect™ Phone to play it on the
vehicle audio system, so you will not hear it. Under this
situation, after successfully dialing a number the user
may feel that the call did not go through even though the
call is in progress. Once your call is answered, you will
hear the audio.
Mute/Un-Mute (Mute OFF)
When you mute the Uconnect™ Phone, you will still be
able to hear the conversation coming from the other
party, but the other party will not be able to hear you. In
order to mute the Uconnect™ Phone:
•
Press the button.
•
Following the beep, say 9Mute.9
In order to un-mute the Uconnect™ phone:
•
Press the button.
•
Following the beep, say 9Mute off.9
Advanced Phone Connectivity
Transfer Call to and from Cellular Phone
The Uconnect™ Phone allows ongoing calls to be trans-
ferred from your cellular phone to the Uconnect™ Phone
without terminating the call. To transfer an ongoing call
from your Uconnect™ Phone paired cellular phone to the
Uconnect™ Phone or vice versa, press the
and say 9Transfer Call.9
Connect or Disconnect Link Between the
Uconnect™ Phone and Cellular Phone
Your cellular phone can be paired with many different
electronic devices, but can only be actively 9connected9
with one electronic device at a time.
button
2
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 28 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 2F5E5116
/chry_pdm/chrysler/supplement/uct/su
28 Uconnect™ Phone
If you would like to connect or disconnect the Bluetootht
connection between a Uconnect™ Phone paired cellular
phone and the Uconnect™ Phone, follow the instructions
described in your cellular phone User’s Manual.
List Paired Cellular Phone Names
Press the button to begin.
•
•
After the “Ready” prompt and the following beep, say
“Setup Phone Pairing.”
•
When prompted, say 9List Phones.9
•
The Uconnect™ Phone will play the phone names of
all paired cellular phones in order from the highest to
the lowest priority. To “select” or “delete” a paired
phone being announced, press the
button and
say “Select” or “Delete.” Also, see the next two sections for an alternate way to “select” or “delete” a
paired phone.
Select Another Cellular Phone
This feature allows you to select and start using another
phone paired with the Uconnect™ Phone.
•
Press the button to begin.
•
After the 9Ready9 prompt and the following beep, say
9Setup Select Phone9 and follow the prompts.
•
You can also press the button at any time while
the list is being played, and then choose the phone that
you wish to select.
•
The selected phone will be used for the next phone
call. If the selected phone is not available, the
Uconnect™ Phone will return to using the highest
priority phone present in or near (approximately
within 30 ft (9 m)) the vehicle.
Delete Uconnect™ Phone Paired Cellular Phones
Press the button to begin.
•
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 29 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 2653FBE1
/chry_pdm/chrysler/supplement/uct/su
Uconnect™ Phone 29
•
After the 9Ready9 prompt and the following beep, say
9Setup Phone Pairing.9
•
At the next prompt, say 9Delete9 and follow the
prompts.
•
You can also press the button at any time while
the list is being played, and then choose the phone you
wish to delete.
Phone Voice Training feature may be used. To enter this
training mode, follow one of the two following proce-
dures:
From outside the Uconnect™ Phone mode (e.g., from
radio mode):
•
Press and hold the button for five seconds until
the session begins, or,
2
Things You Should Know About Your Uconnect™
Phone
Uconnect™ Phone Tutorial
To hear a brief tutorial of the system features, press the
button and say “Uconnect™ Tutorial.”
Voice Training
For users experiencing difficulty with the system recognizing their voice commands or numbers, the Uconnect™
•
Press the button and say the 9Setup, Voice
Training9 command.
Repeat the words and phrases when prompted by the
Uconnect™ Phone. For best results, the Voice Training
session should be completed when the vehicle is parked
with the engine running, all windows closed, and the
blower fan switched off.
This procedure may be repeated with a new user. The
system will adapt to the last trained voice only.
JOBNAME: CHRY SUPPLEMENT (Con PAGE: 30 SESS: 2 OUTPUT: Mon Nov 2 10:26:33 2009 SUM: 20FE5A7E
/chry_pdm/chrysler/supplement/uct/su
30 Uconnect™ Phone
To restore the Voice Command system to factory default
settings, enter the Voice Training session via the above
procedure and follow the prompts.
Voice Command
For best performance, adjust the rearview mirror to
•
provide at least
1
⁄2in (1 cm) gap between the overhead
console (if equipped) and the mirror.
•
Always wait for the beep before speaking.
•
Speak normally, without pausing, just as you would
speak to a person sitting a few feet/meters away from
you.
•
Make sure that no one other than you is speaking
during a voice command period.
•
Performance is maximized under:
•
low-to-medium blower setting,
•
low-to-medium vehicle speed,
•
low road noise,
•
smooth road surface,
•
fully closed windows,
•
dry weather condition.
•
Even though the system is designed for users speaking
in North American English, French, and Spanish accents, the system may not always work for some.
•
When navigating through an automated system such
as voice mail, or when sending a page, at the end of
speaking the digit string, make sure to say 9Send.9
•
Storing names in the phonebook when the vehicle is
not in motion is recommended.
•
It is not recommended to store similar sounding
names in the Uconnect™ phonebook.
Loading...