PEGATRON LS01, LB01 Users Manual

Terms & Conditions
The general terms and conditions for sales, returns, and warranties, as well as the sof tware end user licence agreement of the Basslet are available online: lofelt.com/legal
These terms of use may be amended at any time. Revised terms of use take effect immediately from the time they are published and continued use of the Basslet will be deemed acceptance of updated or amended terms.
Safety Information
Some wireless devices may af fect the performance of hearing aids or pacemakers . Please consult your doctor to determine if operation of the Basslet may interfere with your medical device.
For more information, go to: lofelt.com/legal
FCC and IC Compliance
The Basslet complies with Industry Canada license­exempt RSS standard(s), with Canadian ICES-003 and also with par t 15 of the FCC rules.
Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Cet appareil numérique de la classe B est conforme à la norme NM B- 003 du Canada ainsi qu’aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditionssuivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l ’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Battery Precautions
This device contains a lithium-ion batter y that should only be removed by a Lofelt approved service center. Don’t try to take apar t or fix your Basslet as it may damage the battery and cause injury, as well as void your warranty. Further, do not dispose of the bat tery along with household waste. Contact your local waste disposal agency for the address of the nearest bat tery deposit site.
Caution: Risk of explosion if battery is replaced by an incorrect type.
For more information about battery replacement and recycling , go to: lofelt.com/legal.
RF Exposure Information
The Basslet and sender have been tested and meet applicable limits for Radio Frequency (RF) exposure. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
The sender must not be co-located or operating in conjunction with any other antenna or transmitter. Use of other accessories may not ensure compliance with RF exposure guidelines.
Limited Warranty
Lofelt GmbH guarantees the original purchaser that your Basslet will be free of defects in materials and workmanship for a period of 12 months from the date of original purchase provided that your Basslet is used for the normal consumer purposes. This Limited Warranty covers only a purchase of a new Basslet from Lofelt and accompanied with this written Limited Warranty. The terms of this Limited Warranty are in addition to, and do not reduce or otherwise af fect, your statutory rights.
In order to avoid unnecessar y delays and cost, please don’t return any products without contacting our customer support: support@lofelt.com.
Lofelt ’s full warranty terms are available at: lofelt.com/legal
EU Compliance
Lofelt GmbH is authorized to apply the CE Mark on the Basslet, thereby declaring conformity to the essential requirements and other relevant provisions of Directive 1999/5/EC. Additional information on Basslet’s EU Compliance is available at lofelt.com/legal.
Model No.: Basslet A1 Manufacturer name: Lofelt GmbH
© 2016 Lofelt GmbH. All rights reserved. Lofelt and Basslet are trademarks of Lofelt GmbH.
Welcome to the Basslet!
Congratulations on your new Basslet – a wearable subwoofer that makes you literally feel your music.
Take your time, play your favorite tracks and enjoy a new augmented listening experience!
To get the most out of your Basslet, go to:
lofelt.com/basslet/guide
What’s in the Box?
• Basslet
• Sender (also works as a charger)
• Extra strap for smaller wrists
• Strap tool
• Charging cable
Basslet Sender
Ex tra Strap
Strap Too l
Charging Cable
Get Started
Turn it On
Plug the sender between your music player and your headphones.
Strap the Basslet tightly to your wrist.
Press the top button.
See the white light? You’re all set. The Basslet will turn of f automatically.
How to Charge it
The sender also works as a charger. Plug the charging cable into the sender and connect it to a USB power source.
Snap the magnetic sender contacts to the Basslet’s buttons – and it will start charging.
The red light means it’s charging. The light turns white when it’s fully charged.
Audio Input
LED
Buttons
Terms & Conditions
Intensity
LED
Contacts Charging
Quickstart Guide
Basslet
Charging
Basslet
Headphone
Sender
Loading...