Page 1
Type: ________________________
Round 4 LED
Wall I/D
SPECIFICATIONS
__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________
Wall Mount — 4” Round RD4W4
Project: ______________________
DIMENSIONS
RD4W4
4”
SPECIFICATIONS
Construction
Extruded aluminum housing has diameter of 4”.
Die-cast aluminum end caps mechanically attach
with no exposed fasteners.
Source
Four LED lumen packages (see chart above).
Three available color temperature options
(3000K, 3500K and 4000K).
Optics
Optical system consists of injection-molded
primary optics, co-extruded acrylic lenses and
metal reflectors. Lenses connect end to end to
form a continuous line of light.
Dimming
Dimming down to black standard with eldoLED
driver.
CATALOG NUMBER
Example: RD4W4 W40/20 R8 120 EZB SCT LP835 C032 LM
Lumen Packages:
Specify by Lamp Wattage W20/20 W20/40 W40/20 W40/40
Indirect Low High Low High
Direct Low Low High High
Total Delivered Lumens* 2600 3800 3800 5000
Distribution Percentage
Total Watts* 40 60 60 80
up
/
50/50 30/70 70/30 50/50
down
Finish
Standard finish for housing and end caps is painted
aluminum or gloss white. Consult factory for custom
colors.
Controls
Optional nLight-embedded controls allow for constant
lumen management (LM).
Electrical
LED light engine consists of modular LED boards and
0-10V dimming driver rated 50,000 hours (L80) at
25° C ambient temperature. Driver input wattage is
40W for 2600 delivered-lumen package, 60W for
3800 delivered lumen package, and 80W for 5000
delivered-lumen package per 4’ section.
Specify 120V or 277V. Pre-wired with 16AWG fixture
wire. For special circuiting or wire gauge, consult
factory. Plug-in electrical connectors included.
Low lumen package = 1300 deliverd lumens*, 20W
High lumen package = 2500 delivered lumens*, 40W
* nominal per 4’
Environment
Damp location label option. Ambient operating
temperature O° C to 25° C.
Luminaire Length
4’ and 8’ lengths in a single section for exact
suspension spacing of 4’ and 8’. For total luminaire
length, add 3” for each end cap. Using internal joiners,
4’ and 8’ sections can be joined to form longer rows.
Validation
CSA/CUS listed. FCC part 15 certified. LM-79 tested.
Lighting Facts partner.
Warranty
Five-year limited warranty coverage includes
luminaire construction, LED light engine, driver and
nLight control device. Terms and conditions apply.
Packaging
100% post-consumer recycled cardboard box.
Biodegradable foam inserts and protective luminaire
bag. Recycled kraft paper tape.
__________ _________ __________ __________ __________ __________
Luminaire
RD4W4
______________ ________________ ______________ _________________________________
Switching
SCT Single circuit
Notes:
1 Emergency type is installed in last 4’ of
luminaire sections. Separate feed required
Lamp Wattage
W20/20 1300 nominal delivered-lumens up
1300 nominal delivered-lumens down
W20/40 1300 nominal delivered-lumens up
2500 nominal delivered-lumens down
W40/20 2500 nominal delivered-lumens up
1300 nominal delivered-lumens down
W40/40 2500 nominal delivered-lumens up
2500 nominal delivered-lumens down
LED Color Temperature
LP830 3000K 80+ CRI
LP835 3500K 80+ CRI
LP840 4000K 80+ CRI
2 No dimming control on emergency feed
Luminaire
Row Length
X FT
(4’ increments)
Maximum Section
Length
R4 4’ section(s)
R8 8’ section(s)
Finish
C032 White white (high gloss)
C110 Painted aluminum
C099 Custom finish
Voltage
120
277
Driver Type
EZB eldoLED dims
to black
Options
DL Damp location label
ELH2 Emergency through wiring w/separate feed
GLR Fusing (fast blow)
GMF Fusing (slow blow)
LM 80% lumen management without networking
# of Emergency
Modules
(Blank) None
1SE 1 section
2SE 2 sections
XSE X sections
Emergency Type
(Blank) None
EC Emergency circuit
1
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: techsupport@peerlesslighting.com • PeerlessLighting.com
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx
© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.
RD4W4 Round 4 LED Wall I/D
3
Page 2
Type: ________________________
600
Round 4 LED
Wall I/D
WEIGHTS & SUPPORT SPACING
Suspension spacing equals section length.
STANDARD SECTIONS
1
⁄4”
4
18 LBS
8” 8”
34 LBS
PLAN VIEW
PHOTOMETRICS
0
200
400
4’-6 1⁄4” O.A.
Actual performance may dier as a result of end-user environment and application.
W40/20 LP835
63 lumens per watt
3808 delivered lumens
66% up / 34% down
Project: ______________________
Wall Mount — 4” Round RD4W4
8 1⁄8”
3” for end cap
8’-0”
8’-6” O.A.
Key:
Support or feed location
•
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: techsupport@peerlesslighting.com • PeerlessLighting.com
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx
© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.
RD4W4 Round 4 LED Wall I/D
4
Loading...