Peerless Lighting RD4W1 User Manual
Type: ________________________
Round 4 LED
Wall Asymmetric Indirect
SPECIFICATIONS
__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________
Wall Mount — 4” Round RD4W1
Project: ______________________
DIMENSIONS
RD4W1
4”
Two LED Lumen Packages:
Specify by Lamp Wattage W20 W40
Indirect Low High
Total Delivered Lumens* 1200 2200
Total Watts* 20 40
* nominal per 4’
SPECIFICATIONS
Construction
Extruded aluminum housing has diameter of 4”.
Die-cast aluminum end caps mechanically attach
with no exposed fasteners.
Source
Two LED lumen packages (High and Low).
Three available color temperature options
(3000K, 3500K and 4000K).
Optics
Optical system consists of injection-molded
primary optics, co-extruded acrylic lenses and
metal reflectors. Lenses connect end to end to
form a continuous line of light.
Dimming
Dimming down to black standard with eldoLED
driver.
Finish
Standard finish for housing and end caps is painted
aluminum or gloss white. Consult factory for
custom colors.
Controls
Optional nLight-embedded controls allow for
constant lumen management (LM).
Electrical
LED light engine consists of modular LED boards and
0-10V dimming driver rated 50,000 hours (L80) at
25° C ambient temperature. Driver input wattage is
20W for 1200 delivered-lumen package and 40W
for 2200 delivered-lumen package per 4’ section.
Specify 120V or 277V. Pre-wired with 16AWG fixture
wire. For special circuiting or wire gauge, consult
factory. Plug-in electrical connectors included.
Environment
Damp location label option. Ambient operating
temperature O° C to 25° C.
Luminaire Length
4’ and 8’ lengths in a single section for exact
suspension spacing of 4’ and 8’. For total luminaire
length, add 3” for each end cap. Using internal
joiners, 4’ and 8’ sections can be joined to form
longer rows.
Validation
CSA/CUS listed. FCC part 15 certified. LM-79
tested. Lighting Facts partner.
Warranty
Five-year limited warranty coverage includes
luminaire construction, LED light engine, driver and
nLight control device. Terms and conditions apply.
Packaging
100% post-consumer recycled cardboard box.
Biodegradable foam inserts and protective luminaire
bag. Recycled kraft paper tape.
CATALOG NUMBER
Example: RD4W1 W40 40FT R8 120 EZB ISE EC SCT LP835 C032
__________ _________ __________ __________ __________ __________
Luminaire
RD4W1
______________ ________________ ______________ _________________________________
Switching
SCT Single circuit
Notes:
1 Emergency type is installed in last 4’ of
luminaire sections. Separate feed required
Lamp Wattage
W20 1200 delivered lumens
W40 2200 delivered lumens
LED Color Temperature
LP830 3000K 80+ CRI
LP835 3500K 80+ CRI
LP840 4000K 80+ CRI
Luminaire
Row Length
X FT
(4’ increments)
2 No dimming control on emergency feed
Maximum Section Length
R4 4’ section(s)
R8 8’ section(s)
Finish
C032 White white (high gloss)
C110 Painted aluminum
C099 Custom finish
Voltage
Driver Type
120
EZB eldoLED dims to black
277
Options
DL Damp location label
ELH2 Emergency through wiring w/separate feed
GLR Fusing (fast blow)
GMF Fusing (slow blow)
LM 80% lumen management without networking
# of Emergency Modules
(Blank) None
1SE 1 section
2SE 2 sections
XSE X sections
Emergency Type
(Blank) None
EC Emergency circuit
1
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: techsupport@peerlesslighting.com • PeerlessLighting.com
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx
© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.
RD4W1 Round 4 LED Wall Asymmetric Indirect
1
Type: ________________________
90
100
110
120
130
140
90
100
110
120
130
140
Round 4 LED
Wall Indirect
WEIGHTS & SUPPORT SPACING
Suspension spacing equals section length.
STANDARD SECTIONS
1
⁄4”
4
18 LBS
34 LBS
PLAN VIEW
PHOTOMETRICS
600
450
300
150
8” 8”
150 160 170
4’-6 1⁄4” O.A.
Actual performance may dier as a result of end-user environment and application.
W20 LP835
59 lumens per watt
1170 delivered lumens
100% up
Project: ______________________
Wall Mount — 4” Round RD4W1
8 1⁄8”
3” for end cap
8’-0”
8’-6” O.A.
W40 LP835
54 lumens per watt
2185 delivered lumens
100% up
Key:
Support or feed location
•
LIGHTING FACTS LABELS
RD4W1 1170L 3500K RD4W1 2185L 3500K
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: techsupport@peerlesslighting.com • PeerlessLighting.com
© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx
RD4W1 Round 4 LED Wall Indirect
2
Loading...