Peerless Lighting MN92x2 User Manual
90
270
90
270
90
270
Type: ________________________
Peerless Mino LED
Direct – Surface/Wall – 2’ x 2’
SPECIFICATIONS
__________ __________ __________ __________ __________ __________ __________ _____________________
AVAILABLE LUMINAIRES
MN9 2X2 S
30 LBS
3 7⁄8”
SPECIFICATIONS
Construction
Extruded aluminum with mitered corners
forms housing.
Source
Three LED color temperature options —
3000K, 3500K or 4000K — all within
2.5 MacAdam ellipses.
Lens
1
⁄4” acrylic, high-performance Softshine® lens
fastened with thumb screw.
Finish
Painted aluminum is standard. Custom colors
available, consult factory.
23” x 23” x 3 7⁄8” MN9
23”
Mounting
Powder-coated steel mounting pan is attached
to aluminum housing for secure and simplified
installation.
Electrical
LED light engine consists of modular LED boards
and 0-10V dimmable driver rated (to 5%) for
50,000 hours (L80) at 25°C ambient temperature.
Specify MVOLT for 120V-277V or 347V with
transformer. Pre-wired with 16AWG fixture wire.
For special circuiting or wire gauge, consult factory.
Project: ______________________
Validation
CSA/CUS listed. FCC part 15 certified.
LM-79 tested. Lighting Facts partner.
DesignLights Consortium qualified luminaire.
Warranty
Five-year warranty includes luminaire construction,
LED light engine and driver. Terms and conditions
apply.
Eco-friendly Packaging
100% post-consumer recycled box. 100%
recycled cardboard inserts and kraft paper tape.
Biodegradable, protective luminaire bag.
CATALOG NUMBER
Example: MN9 2X2 S MVOLT D38 LP835 C311 LM
________ ________ ________ ________ ________ ________ ________ ________
Luminaire
MN9
Notes:
1 For use on hard-surface ceiling and walls only
PHOTOMETRICS
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: techsupport@peerlesslighting.com • PeerlessLighting.com
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx
Dimension
2X2
© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.
Mounting Type
S1 Surface
Actual performance may dier as a result of end-user environment and application.
Voltage
MVOLT 120V-277V
347 347V
Driver Type
D38 38W maximum
LP830
101 lumens per watt
3837 delivered lumens
100% down
LP835
103 lumens per watt
3860 delivered lumens
100% down
LED Color Temperature
LP830 3000K 80+ CRI
LP835 3500K 80+ CRI
LP840 4000K 80+ CRI
Finish
C311 Painted aluminum
C312 White (satin)
C099 Custom finish
Options
GLR Fusing (fast blow)
GMF Fusing (slow blow)
LM 80% lumen management
without networking
LP840
108 lumens per watt
4056 delivered lumens
100% down
MN9 Peerless Mino LED
Direct – Surface/Wall – 2’ x 2’
1
Type: ________________________
Peerless Mino LED
Direct – Surface/Wall – 2’ x 2’
23” x 23” x 3 7⁄8” MN9
LIGHTING FACTS
LP830 LP835
Project: ______________________
LP840
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: techsupport@peerlesslighting.com • PeerlessLighting.com
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx
© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.
MN9 Peerless Mino LED
Direct – Surface/Wall – 2’ x 2’
2
Loading...