Peerless Lighting LLMW User Manual

Lightline Wall-Wash
Direct

Direct T5/T5HO

Type: ________________________

Project: ______________________

SPECIFICATIONS

__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________

Suspended LLMW

LAMPING OPTIONS

LLMW

4 1⁄16”

3 5⁄8”

SPECIFICATIONS

Construction

Extruded aluminum housing forms a 3 5⁄8” x 4 1⁄16”
rectangular profile. Die-cast aluminum end caps
mechanically attach with no exposed fasteners.

Reflectors

Specular asymmetric reflector system with black
perforated metal diuser.

Finish

Satin anodized finish consists of satin anodized
housing with end caps painted to match. Custom
colors available, consult factory.

Electrical

Specify 120V, 277V or 347V. Pre-wired with 16AWG
fixture wires. For special circuiting or wire gauge,
consult factory. Plug-in electrical connectors
included. UL and C-UL listed.

Luminaire Length

4’, 8’ and 12’ lengths in a single section. For total
luminaire length, add 7⁄8” for each end cap. Using
internal joiners, 4’, 8’ and 12’ sections can be joined
to form longer rows.

CATALOG NUMBER

Examples: LLMW 1 28T5 40FT R8 277 GEB10 SCT LP835 F1/18 C100

__________ __________ __________ _________ __________ __________ __________ __________

Luminaire

LLMW

# of Lamps in
Cross Section

1

Lamp Type

28T5 28W T5
54T5HO 54W T5HO

Luminaire
Row
Length

X FT

(4’ increments)

Maximum
Section
Length

R4 4’ section(s)
R8 8’ section(s)
R12 12’ section(s)

Voltage

120
277
347

Ballast Type

GEB10 <10% THD Electronic

1,2

ADEZ

Advance Mark 10 dim

DMHL3D1 Lutron Hi-Lume dim
ADZT1 Advance Mark 7 0-10V dim

1,2

OSDIM

Osram 0-10V dim

Reference Ballast Wizard on website
or consult factory for other options.

# of Emergency
Modules

(Blank) None
1SE 1 section
2SE 2 sections
XSE X sections

______________ ________________ ________________ ______________ ______________ ______________ _________________________________

Emergency Type

(Blank) None
EC Emergency circuit
EL1 Emergency

battery pack

EN1 Emergency

battery pack
w/night light
circuit

Notes:

1 Not available in 347V
2 Not available with 28T5 lamps

3

Switching

SCT Single circuit

Lamp Color

L/LP No lamp
LP830 3000k 80+ CRI
LP835 3500k 80+ CRI
LP841 4100k 80+ CRI

Available with T5 only:
LP830P 3000K 80+

CRI Premier

LP835P 3500K 80+

CRI Premier

LP841P 4100K 80+

CRI Premier

Reference Lamp Chart on
website or consult factory
for other options.

3 Emergency type is installed in last 4’ of luminaire sections.

Separate feed required unless ELS or ELS2 is specified

Mounting Type /

F1/ T-bar ceiling (universal

mounting bracket)

F1A/ T-bar ceiling (UMB with

integrated J-box)

F2/ Hard ceiling (horizontal

J-box)

F3/ Rigid stem

Overall
Suspension

12 12”
15 15”
18 18”
21 21”
24 24”
XX XX”

Overall
suspension is
measured from
ceiling to bottom
of luminaire.

Finish

C041 White white (low

gloss)

C100 Satin anodized

finish

C099 Custom finish

Options

ACG Adjustable cable grippers
BLK Black cord, cord manager and canopy (not

available with F3)

CP Chicago plenum (available with F1A only)
DL Damp location label
ELH Emergency through wiring w/separate feed
ELS Emergency through wiring w/single feed,

shared neutral

ELS2 Emergency through wiring w/single feed,

separate neutrals

GLR Fusing (fast blow)
GMF Fusing (slow blow)
MCS Matching feed canopy at support
NEPP5D nLight enabled control module per row/zone
NYC New York City code
OJB Oset junction box
SLP Sloped ceiling (for 10-45°, must be specified

with F2, ACG and OJB options)

XXXX Integrated sensor; choose options and obtain

code on page 2

2246 5th Street, Berkeley, CA 94710 • Tel: [phone] • Fax: [phone] • Email: [e-mail] • PeerlessLighting.com

Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx

© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Lightline” are registered trademarks of Acuity Brands Lighting.

LLMW  Lightline Wall-Wash

Direct T5/T5HO

1

Type: ________________________

Lightline Wall-Wash Direct

Project: ______________________

Direct T5/T5HO

Suspended LLMW

INTEGRATED NLIGHT MICRO SENSOR

Determine the appropriate sensor type, network type and sensor power source for your application. Enter the code in the Options section of the Catalog Number.

EXAMPLE: PDT1

Sensor Type (choose one)

ADC

nLight model
nES ADCX

PDT

nLight model
nES PDT7 ADCX

For more information about the Integrated nLight Micro Sensor, its capabilities and options, download the PDF guide at: PeerlessLighting.com/nLight-Sensor-Guide
*nLight-Enabled (network-ready) options include one RJ-45 connector on the luminaire and 10’ of Cat-5e cable and a splitter to control the entire luminaire row (depending on
wattage/voltage limitations). The Cat-5e cable drop is located in the same section as the sensor. For multiple zones, please contact [e-mail].

Daylight Dimming

Specify 0-10V dimming ballast
No occupancy sensing

Daylight Dimming and/or Occupancy Detection

Specify 0-10v dimming ballast for daylight dimming
Specify fixed-output ballast for occupancy detection only
(daylight dimming disabled)

1* nLight-Enabled (Network-Ready) with Luminaire-Integrated Power Pack

10’ Cat-5e cable and splitter provided

2 Standalone Operation (No Networking) with Luminaire Integrated Power Pack

No Cat-5e cable provided

3* nLight-Enabled (Network-Ready) with Remote nLight Power Pack or nPanel

10’ Cat-5e cable and splitter provided
Order required remote nLight Power Pack or nPanel
separately through nLight (Acuity Brands Controls)

WEIGHTS & SUPPORT SPACING

Suspension spacing equals section length. Default location shown. Consult factory for stem mounting suspension spacing and alternate locations.

STANDARD SECTIONS

7

8’-0”

3

⁄4” O.A.

⁄8” end cap

12’-1

12’-0”

3

⁄4” O.A.

4’-0”

12 LBS

4’-1 3⁄4” O.A.

24 LBS

8’-1

36 LBS

PLAN VIEW

Network Type & Sensor Power Source (choose one)

Key:

Standard feed location
EM feed location

•

7

⁄8” end cap

7

⁄8” end cap

CONFIGURATIONS

Mitered corner, “X” and “T” connectors available for suspended configurations.
Reference Pattern Connector Guide for additional details.

PHOTOMETRICS

2246 5th Street, Berkeley, CA 94710 • Tel: [phone] • Fax: [phone] • Email: [e-mail] • PeerlessLighting.com

Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx

Actual performance may dier as a result of end-user environment and application.

1-LAMP T5HO

62.3% eciency
3115 delivered lumens

0.0% up / 100.0% down

© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Lightline” are registered trademarks of Acuity Brands Lighting.

LLMW  Lightline Wall-Wash

Direct T5/T5HO

2