Peerless Lighting LL1W User Manual

Type: ________________________

Lightline Wall

Indirect T5/T5HO

SPECIFICATIONS

__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________

LAMPING OPTIONS

LL1W1 D

SPECIFICATIONS

Construction

Housing is extruded aluminum forming a
2 3⁄4”x 2 1⁄2” rectangular profile. Die-cast end plate
mechanically attaches with no exposed fasteners.

Reflectors

Die-formed, pre-finished white reflector with
hammertone specular aluminum.

5

⁄8”

2 1⁄2”

2 3⁄4”

Wall Mount LL1W1

LL1W1 X

4 3/4”

1

/4”

1

Electrical

Specify 120V, 277V or 347V. Pre-wired with 16AWG
fixture wires. For special circuiting or wire gauge,
consult factory. Plug-in electrical connectors
included. UL and C-UL listed.

Finish

Standard colors include satin anodized aluminum,
and white white (low gloss). Custom colors
available, consult factory.

6"

1

2

/4”

Luminaire Length

4’, 8’, and 12’ lengths for a single section. For total
luminaire length, add 3⁄4” for each end plate. Using
internal joiners, 4’, 8’, and 12’ sections can be joined
to form longer rows.

Project: ______________________

CATALOG NUMBER

Examples: LL1W1 D 1 28T5 8FT R8 120 GEB10 SCT LP830 C100 — LL1W1 X 1 54T5HO 12FT R12 120 ADEZ SCT LP830 C041

__________ __________ __________ __________ _________ __________ __________ __________ __________

Luminaire

LL1W1

______________ ________________ ________________ ______________ _________________________________

Emergency Type

(Blank) None
EC Emergency circuit
EL1 Emergency battery pack
EN1 Emergency battery pack

Mounting Type

D Wall spacer
X 6” extended

arm mount

3

w/night light circuit

# of Lamps in
Cross Section

1

Switching

SCT Single circuit

Lamp Type

28T51 28W T5
54T5HO 54W T5HO

Luminaire
Row Length

X FT

(4’ increments)

Lamp Color

L/LP No lamp
LP830 3000k 80+ CRI
LP835 3500k 80+ CRI
LP841 4100k 80+ CRI

Available with T5 only:
LP830P 3000K 80+ CRI Premier
LP835P 3500K 80+ CRI Premier
LP841P 4100K 80+ CRI Premier

Reference Lamp Chart on website or
consult factory for other options.

Maximum
Section Length

R4 4’ section(s)
R8 8’ section(s)
R12 12’ section(s)

Voltage

120
277
347

Finish

C041 White white (low gloss)
C100 Satin anodized finish
C099 Custom finish

Ballast Type

GEB10 <10% THD Electronic

1,2

ADEZ

Advance Mark 10 dim

DMHL3D1 Lutron Hi-Lume dim
ADZT1 Advance Mark 7 0-10V dim

1,2

OSDIM

Osram 0-10V dim

Reference Ballast Wizard on website
or consult factory for other options.

Options

DL Damp location label
ELH Emergency through wiring w/separate feed
ELS Emergency through wiring w/single feed,

shared neutral

ELS2 Emergency through wiring w/single feed,

separate neutrals

GLR Fusing (fast blow)
GMF Fusing (slow blow)

# of Emergency
Modules

(Blank) None
1SE 1 section
2SE 2 sections
XSE X sections

Notes:

1 Not available in 347V
2 Not available with 28T5 lamps

3 Emergency type is installed in last 4’ of luminaire

sections. Separate feed required unless ELS or ELS2 is
specified

2246 5th Street, Berkeley, CA 94710 • Tel: [phone] • Fax: [phone] • Email: [e-mail] • PeerlessLighting.com

Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx

© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Lightline” are registered trademarks of Acuity Brands Lighting.

LL1W1  Lightline Wall

Indirect T5/T5HO

1

Type: ________________________

Lightline Wall

Indirect T5/T5HO

MOUNTING DETAIL (WALL SPACER “D”)

Wall Bracket

7”

6”

Mounting holes to fixture

WEIGHTS & SUPPORT SPACING

STANDARD SECTIONS

9 LBS

8 1/8”

2’-8”

4’-1 3/4” O.A.

Mounting holes
for 1⁄4” bolt

Project: ______________________

Wall Mount LL1W1

5

⁄8”

23⁄

12⁄

3

3

/4” end cap

8

” ”

1 1⁄4”

Key:

Support location

Standard feed location

EM feed location

•

14 LBS

8 1/16”

8”

19 LBS

ELEVATION

CONFIGURATIONS

Mitered inside and outside “L” connectors available for wall configurations.
Reference Pattern Connector Guide for additional details.

PHOTOMETRICS

6’-8”

8’-0 5/8” O.A.

5’–4” 5’–4”

12’-1 1/2” O.A.

Actual performance may dier as a result of end-user environment and application.

1-LAMP T5HO

75.2% eciency
3761 delivered lumens

100.0% up / 0.0% down

3

/4” end cap

3

/4” end cap

2246 5th Street, Berkeley, CA 94710 • Tel: [phone] • Fax: [phone] • Email: [e-mail] • PeerlessLighting.com

Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx

© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Lightline” are registered trademarks of Acuity Brands Lighting.

LL1W1  Lightline Wall

Indirect T5/T5HO

2