Peerless Lighting EGRW9 User Manual

EGRW9 1-T5 GTO

EGRW9 1-T5 GTO

EGRW9 2-T5 GTO

EGRW9 1-T5 GTO

EGRW9 2-T5 GTO

EGRW9 1-T5 OPD

EGRW9 1-T5 GTO

EGRW9 2-T5 GTO

EGRW9 1-T5 OPD

EGRW9 2-T5 OPD

Type: ________________________

Lightedge Rectangular

Project: ______________________

Wall Softshine or GrateOptic

Indirect T5/T5HO

SSHGTO

SPECIFICATIONS

__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________

Wall Mount EGRW9

LAMPING OPTIONS

EGRW9 - 1 - GTO EGRW9 - 2 - GTO EGRW9 - 1 - SSH EGRW9 - 2 - SSH

1 1⁄2” 1 1⁄2” 1 1⁄2” 1 1⁄2”

7 1⁄2” 7 1⁄2” 7 1⁄2” 7 1⁄2”

SPECIFICATIONS

Construction

Housing and end caps are extruded aluminum
forming an 7 1⁄2” x 1 1⁄2” rectangular profile.

Reflectors

Die-formed white painted reflector (nominal
reflectance 90%) and hammertone specular
aluminum. Prismatic acrylic kicker lens.

Shielding

Crenulated GrateOptic® diuser or Softshine® high
performance lens.

Finish

Satin anodized standard. Custom colors available,
consult factory.

Electrical

Specify 120V, 277V or 347V. Pre-wired with 16AWG
fixture wires. For special circuiting or wire gauge,
consult factory. Plug-in electrical connectors

included. UL and C-UL listed.

Luminaire Length

4’, 8’ and 12’ lengths in a single section. For total
luminaire length add 4” for each end cap. Using
internal joiners, 4’, 8’ and 12’ sections can be joined
to form longer-length luminaires.

CATALOG NUMBER

Examples: EGRW9 1 54T5HO SSH 40FT R12 120 GEB10 2SE EL SCT LP835 C100 — EGRW9 2 54T5HO SSH 12FT R12 277 GEB10 DCT L/LP C100

__________ __________ __________ _________ _________ __________ __________ __________ __________ __________

Lumi­naire

EGRW9

# of Lamps
in Cross
Section

1
2

Lamp Type

28T51 28W T5
54T5HO 54W T5HO

Shielding

GTO GrateOptic
SSH Softshine

Luminaire
Row
Length

X FT

(4’ increments)

Maximum
Section Length

R4 4’ section(s)
R8 8’ section(s)
R12 12’ section(s)

Voltage

120
277

2

347

Ballast Type

GEB10 <10% THD Electronic

1,2

ADEZ

Advance Mark 10 dim

DMHL3D1 Lutron Hi-Lume dim

1,2

OSDIM

Osram 0-10V dim

Reference Ballast Wizard on website
or consult factory for other options.

# of Emergency
Modules

(Blank) None
1SE 1 section
2SE 2 sections
XSE X sections

Emergency Type

(Blank) None
EC Emergency circuit
EL1 Emergency battery

EN1 Emergency battery

3

pack

pack w/night light
circuit

______________ ________________ ______________ _________________________________

Switching

SCT Single circuit
DCT Dual circuit

Notes:

1 Not available in 347V
2 Not available with 28T5 lamps

2246 5th Street, Berkeley, CA 94710 • Tel: [phone] • Fax: [phone] • Email: [e-mail] • PeerlessLighting.com

Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx

Lamp Color

L/LP No lamp
LP830 3000k 80+ CRI
LP835 3500k 80+ CRI
LP841 4100k 80+ CRI

Available with T5 only:
LP830P 3000K 80+ CRI Premier
LP835P 3500K 80+ CRI Premier
LP841P 4100K 80+ CRI Premier

Reference Lamp Chart on website or
consult factory for other options.

3 Emergency type is installed in last 4’ of luminaire sections.

Separate feed required unless ELS or ELS2 is specified

© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Lightedge” are registered trademarks of Acuity Brands Lighting.

Finish

C041 White white (low gloss)
C100 Satin anodized finish
C099 Custom finish

Options

DL Damp location label
DU Dust cover
ELH Emergency through wiring w/separate feed
ELS Emergency through wiring w/single feed, shared neutral
ELS2 Emergency through wiring w/single feed, separate neutrals
EXT 3” extended mount (consult factory)
GLR Fusing (fast blow)
GMF Fusing (slow blow)

EGRW9  Lightedge Rectangular Wall Softshine or GrateOptic

Indirect T5/T5HO

1

Lightedge Rectangular Wall Softshine or GrateOptic

Indirect T5/T5HO

Wall Mount EGRW9

MOUNTING DETAIL

Type: ________________________

Project: ______________________

9

⁄16”*

7

⁄8”

Arm Mount Extension Available. Contact Factory.

*Dimension shown is from mounting hole to top of luminaire

WEIGHTS & SUPPORT SPACING

STANDARD SECTIONS

2’–8”

16 LBS

4’–6 3⁄4” O.A.

3’–4” 3’–4”

32 LBS

43 LBS

ELEVATION

8’–5” O.A.

4’–0”

1’–4” Typical

Feed Cover Plate

#005 Soft White

Retainer Bracket

Screw #10

Wall Bracket

2” x 4” switch box

at feed, mounted

horizontally —

by others

1

12’–3

⁄2” O.A.

Center of switchbox
to top of luminaire 1⁄8”

CAUTION:

Wall must be adequately reinforced at support locations for sound
structural and aesthetic installation of this luminaire — by others.

Key:

Support location

Feed location

•

EM feed location

4’–0”2’–8”

CONFIGURATIONS

Angular sweep connectors and mitered connectors for inside corners available for wall configurations. Reference Pattern

Connector Guide for additional details.

PHOTOMETRICS

2246 5th Street, Berkeley, CA 94710 • Tel: [phone] • Fax: [phone] • Email: [e-mail] • PeerlessLighting.com

Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx

Actual performance may dier as a result of end-user environment and application.

1-LAMP T5HO WITH GTO

78.0% eciency
3898 delivered lumens

97.9% up / 2.1% down

1-LAMP T5HO WITH SSH

65.7% eciency
3286 delivered lumens

97.7% up / 2.1% down

© 2014 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Lightedge” are registered trademarks of Acuity Brands Lighting.

2-LAMP T5HO WITH GTO

78.0% eciency
7805 delivered lumens

93.1% up / 6.9% down

2-LAMP T5HO WITH SSH

74.5% eciency
7451 delivered lumens

91.8% up / 8.2% down

EGRW9   Lightedge Rectangular Wall Softshine or GrateOptic

Indirect T5/T5HO

2