Peerless Lighting BRM9 User Manual

Type: ________________________

Bruno

Softshine

Project: ______________________

I/D or Direct T5/T5HO

SPECIFICATIONS

__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________

lamping options

BRM9 - 1 - SSH BRM9 - 2 - SSH BRM9 - 3 - SSH

1 3⁄4” 1 3⁄4” 1 3⁄4”

8 1⁄4” 8 1⁄4” 8 1⁄4”

spECiFiCations

Construction

Nominal 8 1⁄4” x 1 3⁄4” rectangular housing is formed
from cold-rolled steel. Die-cast end caps are
mechanically attached with no exposed fasteners.

Reflectors

Die-formed specular reflector with 95% reflectance.

Shielding

Flush Softshine® high-performance lens.

Suspended BRM9

Finish

Fine-textured, white polyester powder paint
is standard. Consult factory for special finish
requirements.

Electrical

Specify 120V, 277V or 347V. Pre-wired with 16AWG
fixture wires. For special circuiting or wire gauge,
consult factory. Plug-in electrical connectors
included. UL and C-UL listed.

Luminaire Length

4’ 3⁄8”, 8’ and 12’ lengths in a single section for
nominal support spacing at 4’, 8’ and 12’. For total
luminaire length, add 5⁄8” for each flat end cap
and 4” for each sculptured end cap. Using internal
joiners, 4’, 8’ and 12’ sections can be joined to form
longer rows.

Catalog nUmBER

Examples: BRM9 2 28T5 SPR SSH 40FT R8 277 GEB10 DCT LP835 F1/18 C210 SCEP — BRM9 3 54T5HO SPR SSH 32FT R8 277 GEB10 1SE EL DCT LP835 F1/21 C110

________ __________ ______ __________ __________ __________ _________ __________ __________ __________

Luminaire

BRM9

______________ ___________ __________ ________________ ______________ ______________ ______________ _________________________________

# of Emergency
Modules

(Blank) None
1SE 1 section
2SE 2 sections
XSE X sections

Notes:

1 Not available in 347V
2 Not available with DU option
3 Not available on 2 or 3-lamp 54T5HO luminaires
4 Not available with 28T5 lamps

# of Lamps
in Cross
Section

1
2
3

Emergency
Type

(Blank) None
EC Emergency

1

Emergency

EL

1

Emergency

EN

Lamp Type

28T51 28W T5
54T5HO 54W T5HO

5

circuit

battery
pack

battery
pack
w/night
light circuit

Reflector

SPR Specular

Switching

SCT Single

DCT Dual

Lamp Color

L/LP No lamp

circuit

LP830 3000k 80+ CRI
LP835 3500k 80+ CRI

circuit

LP841 4100k 80+ CRI

Available with T5 only:
LP830P 3000K 80+

LP835P 3500K 80+

LP841P 4100K 80+

Reference Lamp Chart on
website or consult factory
for other options.

5 Emergency type is installed in last 4’ of luminaire

sections. Separate feed required unless ELS or ELS2
is specified

reflector

CRI Premier

CRI Premier

CRI Premier

Distribution

Blank Standard;

20/80 20% Up;

0/100

2246 5th Street, Berkeley, CA 94710 • Tel: [phone] • Fax: [phone] • Email: [e-mail] • PeerlessLighting.com

Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx

© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Peerless Bruno” are registered trademarks of Acuity Brands Lighting.

2

Shielding

70% Up;
30% Down

80% Down

3

0% Up;

100% Down

SSH Softshine® high

Mounting Type /

F1/ T-bar ceiling

(universal
mounting bracket)

F1A/ T-bar ceiling (UMB

with integrated
J-box)

F2/ Hard ceiling

(horizontal J-box)

F3/ Rigid stem

performance lens

Overall
Suspension

12 12”
15 15”
18 18”
21 21”
24 24”
XX XX”

Overall
suspension
is measured
from ceiling
to bottom of
luminaire.

Luminaire
Row
Length

X FT

(4’ increments)

Finish

C110 Painted

C210 White

C099 Custom

Maximum
Section
Length

R4 4’ section(s)
R8 8’ section(s)
R12 12’ section(s)

Options

aluminum
(low gloss)

white
(fine­textured
low gloss)

finish

ACG Adjustable cable grippers
BLK Black cord, cord manager and canopy (not available

CP Chicago plenum (available with F1A only)
DL Damp location label
DU
ELH Emergency through wiring w/separate feed
GLR Fusing (fast blow)
GMF Fusing (slow blow)
MCS Matching feed canopy at support
NEPP5D nLight enabled control module per row/zone
NYC New York City code
OJB Oset junction box
SCEP Sculptured end cap
SLP Sloped ceiling (for 10-45°, must be specified with F2,

XXXX Integrated sensor; choose options and obtain code on

Voltage

120
277
347

with F3)

3

Dust cover

ACG and OJB options)

page 2

Ballast Type

GEB10 <10% THD Electronic

1,4

Advance Mark 10 dim

ADEZ

1

Lutron Hi-Lume dim

DMHL3D

1,4

Osram 0-10V dim

OSDIM

Reference Ballast Wizard on website
or consult factory for other options.

BRM9  Bruno  Softshine

I/D or Direct T5/T5HO

1

Type: ________________________

Bruno Softshine

Project: ______________________

I/D or Direct T5/T5HO

Suspended BRM9

iNteGrAteD NLiGht micro seNsor

Determine the appropriate sensor type, network type and sensor power source for your application. Enter the code in the Options section of the Catalog Number.

EXAMPLE: PDT1

Sensor Type (choose one)

ADC

nLight model
nES ADCX

PDT

nLight model
nES PDT7 ADCX

For more information about the Integrated nLight Micro Sensor, its capabilities and options, download the PDF guide at: PeerlessLighting.com/nLight-Sensor-Guide
*nLight-Enabled (network-ready) options include one RJ-45 connector on the luminaire and 10’ of Cat-5e cable and a splitter to control the entire luminaire row (depending on
wattage/voltage limitations). The Cat-5e cable drop is located in the same section as the sensor. For multiple zones, please contact [e-mail].

weights & support spacing

weights & support spacing

Suspension spacing equals section length. Default location shown. Consult factory for stem mounting suspension spacing and alternate locations.

22 LBS

Daylight Dimming

Specify 0-10V dimming ballast
No occupancy sensing

Daylight Dimming and/or Occupancy Detection

Specify 0-10v dimming ballast for daylight dimming
Specify fixed-output ballast for occupancy detection only
(daylight dimming disabled)

STANDARD SECTIONS

4’-0 3⁄8”

4’-1 5⁄8” O.A.

5

⁄8” standard flat end plates

4” optional sculptured end plates

1* nLight-Enabled (Network-Ready) with Luminaire-Integrated Power Pack

10’ Cat-5e cable and splitter provided

2 Standalone Operation (No Networking) with Luminaire Integrated Power Pack

No Cat-5e cable provided

3* nLight-Enabled (Network-Ready) with Remote nLight Power Pack or nPanel

10’ Cat-5e cable and splitter provided
Order required remote nLight Power Pack or nPanel
separately through nLight (Acuity Brands Controls)

Network Type & Sensor Power Source (choose one)

Key:

Support or feed location

•

x Please consult factory for sensor placement

38 LBS

54 LBS

PLAN VIEW

configurations

photometrics

8’-0”

8’-1 1⁄4” O.A.

12’-0”

12’-1 1⁄4” O.A.

Tenon “L”, “T”, “X” and straight connectors available for suspended configurations.
Reference Pattern Connector Guide for additional details.

Actual performance may dier as a result of end-user environment and application.

1-LAMP T5HO WITH SSH

95.8% eciency
4792 delivered lumens

78.2% up / 21.8% down

2-LAMP T5HO WITH SSH

82.3% eciency
8235 delivered lumens

76.7% up / 23.3% down

3-LAMP T5HO WITH SSH

91.3% eciency
13689 delivered lumens

69.5% up / 30.5% down

2246 5th Street, Berkeley, CA 94710 • Tel: [phone] • Fax: [phone] • Email: [e-mail] • PeerlessLighting.com

Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx

© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Peerless Bruno” are registered trademarks of Acuity Brands Lighting.

BRM9  Bruno Softshine

I/D or Direct T5/T5HO

2

Type: ________________________

Bruno Softshine

I/D or Direct T5/T5HO

photometrics

Actual performance may dier as a result of end-user environment and application.

1-LAMP T5HO WITH SSH
AND 20/80 VDR

75.4% eciency
3768 delivered lumens

18.9% up / 81.1% down

Project: ______________________

Suspended BRM9

2-LAMP T5HO WITH SSH
AND 20/80 VDR

66.3% eciency
6629 delivered lumens

20.4% up / 79.6% down

3-LAMP T5HO WITH SSH
AND 20/80 VDR

64.5% eciency
9669 delivered lumens

17.3% up / 82.7% down

2246 5th Street, Berkeley, CA 94710 • Tel: [phone] • Fax: [phone] • Email: [e-mail] • PeerlessLighting.com

Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx

© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Peerless Bruno” are registered trademarks of Acuity Brands Lighting.

BRM9  Bruno Softshine

I/D or Direct T5/T5HO

3