PEERLESS XLS 10″ Subwoofer User Manual [ru]

Specs:

XLS 10″ Subwoofer

Type Number: 830452 Features:

This new series of state-of-the-art subwoofers continue to enhance Peerless' reputation for delivering the highest quality components for bass in the world. Called the XLS - for "Extra Long Stroke" - these new audio transducers add even more excursion, and completely eliminate distortion. See architecture notes for XLS Platform

Driver Highlights: Thick Nomex cone, 51 mm voice coil, ALP See application notes for XLS subwoofer

Go to Architecture Notes

Electrical Data

Nominal impedance Minimum impedance Maximum impedance DC resistance Voice coil inductance Capacitor in series with x ohm

T-S Parameters

Resonance Frequency Mechanical Q factor Electrical Q factor Total Q factor Force factor Mechanical resistance Moving mass Suspension complian ce Effective cone diameter Effective piston area Equivalent volume Sensitivity (2.83V/1m) Ratio BL/√(Re) Ratio fs/Qts

Power handling

Zn 8 ohm Zmin 4.9 ohm Zo 53.3 ohm Re 3.4 ohm Le 4.3 mH Cc 22 uF

fs 18.9 Hz Qms 2.63 Qes 0.18 Qts 0.17 Bl 17.5 Tm Rms 6.12 Kg/s Mms 135.3 g Cms 0.52 mm/N D 21.2 cm Sd 352 cm Vas 89.7 ltrs

88.4 dB 112 F --

100h RMS noise test (IEC) Long-term Max Power (IEC 18.3) Max linear SPL (rms) @ power Short Term Max power (IEC 18.2)

Voice Coil and Magnet Parameters

Voice coil diameter Voice coil height Voice coil layers Height of the gap Linear excursion +/Max mech. excursion +/Flux density of gap Total useful flux Diameter of magnet Height of magnet Weight of magnet

Notes: IEC specs refer to IEC 60268-5 third edition. All Tymphany products are RoHS compliant.

-- W

-- dB/W

-- W

51 mm 33 mm 4 8 mm

-- mm

1.04 mWb

2.5 mWb 147 mm 35 mm

2.42 Kg

Frequency: 830452

Mechanical Dimensions:830452