Peerless-AV WL-SR560M-200 Installation
Installation and Assembly:
y
A
Metal Stud Wall Plate for FPS-1000 or SP850
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Models: WSP816,
WSP816-W
Parts List
Description Qt
16" wall plate 1
B
1/4-20 x 1/2 phillips head screw 4
1/4" flat washer
C
D
1/4-20 x 2.5 phillips head screw 6
E
toggler 6
B
Use a stud finder to locate stud centers. Use wall
plate (A) as a template to mark stud centers
through slots. Drill 3/4" (19 mm) dia. holes through
drywall and studs. Insert togglers (E) as shown
below. Six 1/4-20 x 2.5" phillips screws (D) and six
washers (C) are provided. Place screws (D) through
wall plate (A). Partially fasten the toggler (E) to the
back of the screw. Pivot ends of toggler (E) 90°.
C
D
WSP816 WSP816-W
. Part # Part #
024-1047 024-2047
510-9108 510-9108
10 540-9440 540-9440
520-9522 520-9522
590-1093 590-1093
• Make sure that mounting screws are anchored into
the center of the studs. The use of an "edge to edge"
stud finder is highly recommended.
A
A
E
Maximum Load Capacity: 150 lb (68 kg)
WARNING
E
E
D
Push toggler (E) through hole.
C
A
C
D
A
1 of 2
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
D
A
D
Pull screw (D) back until toggler (E) hits the inside of
the metal stud. Fasten all six screws (D) tight, until
wall plate (A) is flush with wall.
E
E
ISSUED: 03-24-09 SHEET #: 125-9056-1
Secure FPS-1000, or SP850 to wall plate using
four 1/4-20 x 1/2" phillips head screws (B) and
1/4" flat washers (C).
C
B
FPS-1000 OR SP850
2 of 2
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 03-24-09 SHEET #: 125-9056-1
© 2009 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
Loading...