Driver Specification Sheet
Model No:
Product Line:
TC6FC00-04
Tymphany
Product Description
This TC family 2 inch 4 ohm full-range driver,with neodymium magnet, paper cone and rubber surround,
and steel basket, is designed to be a cost-effective high performance full range driver. The cone utilizes
Tymphany-patented PentaCut NRSC cone technology to help dampen and control cone resonances,
optimizing the listening experience. The motor contains a copper cap to lower inductance and distortion.
The product was designed with portable and other compact applications in mind.
Mechanical Drawing
Rev:
Last Update:
1
2015-08-27 18:51:30
Specifications
DC Resistance
Minimum Impedance
Voice Coil Inductance
Resonant Frequency
Mechanical Q Factor
Electrical Q Factor
Total Q Factor
Ratio Fs/Qts
Half Space Sensitivity @2.83V
Half Space Sensitivity @1W/1M
Gap Height
Maximum Linear Excursion
Ferrofluid Type
Driver Mass
Revc Ohms 3.43 5.0%
Zmin Ohms 3.89 7.5%
Le mH 0.03
Fs Hz 186.8 15%
Qms 3.29
Qes 1
Qts 0.77
F Fs/Qts 243.87
db@2.83V/1M dB 86.34 +/- 1.0db
db@1W/1M dB 83.2 +/- 1.0db
Gh mm 3
Xmax mm 1
FF
Kg 0.08
Frequency and Impedance Response
Energy Bandwidth Product
Moving Mass
Suspension Compliance
Effective Cone diameter
Effective Piston Area
Effective Volume
Motor Force Factor
Motor Efficiency Factor
Voice coil former Material
Voice coil inner diameter
Rated Noise Power
Test Spectrum Bandwidth
Driver Size
EBP (1/Qes)*fs
Mms g 1.1
Cms um/N 641
D cm 4.4
Sd cm^2 15.2
Vas L 0.21
BL Tm 2.14
ß (T*M^2)/Ohms 1.3
VCfm ASV
VCd mm 19.32
P W 15
150Hz - 20kHz
Inch 2 in
Address : Room 1307-8 Dominion Centre, 43-59 Queens Rd East, Wanchai, Hong Kong
Tymphany HK LTD
E-mail: sales@tymphany.com