Peerless-AV SP737P Installation

Installation and Assembly - Radial Cube Speaker Mount

Peerless Industries, Inc.

3215 W. North Avenue Melrose Park, IL 60160

For customer service call:

1-800-865-2112

Visit the Peerless web site at:

www.peerlessmounts.com

Note: Read entire instruction sheet before

you start assembly and installation.

Model: SPK815

WARNING

• Speaker weight shall not exceed 75 lb (34 kg).

Parts List

PART # QTY. DESCRIPTION

A 087-1038 1 black mounting plate B 087-2038 1 white mounting plate C 6100-172 1 tubing D 520-9242 8 U-bolt E 530-9302 16 hex nut F 540-9402 16 split washer

Note: Some parts may appear slightly different than illustrated.

A,B

Before you start make sure all parts listed are included with your product.

A or B

Mounting plates (A & B) come in two colors - white and black. Mount plates according to the color configuration

of speakers / wall.

Note: Fasteners for attaching mounting plates to wall and speaker are NOT included. It is the installers respondsibility to securely attach plates to wall and speaker using appropriate fasteners.

Vertically mount plate (A or B) to wallstud.

(If possible use a stud finder to locate stud.)

Horizontally mount plate (A or B) to speaker.

Attach tubing (C) to plate on wall using four U-bolts (D) eight hex nuts (E) and eight washers (F) as shown.

Hand tighten hex nuts (E). Leave hex nuts (E) loose until speaker has been mounted and proper aimed.

Attach speaker/plate assembly to tubing (C) using remaining U-bolts (D), hex nuts (E) and washers (F).

Hand tighten hex nuts (E). Adjust speaker position. Once speaker is properly positioned, securely tighten all hex nuts (E).

© 2005 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark of Peerless Industries, Inc. All other brand and product names are trademarks or registered trademarks of their respective owners.

1 of 1 Issued:07-22-91 Sheet #:087-9008-2 07-27-05