Peerless Industries PRS 274-W, PRS 274-S, PRS 274 User Manual

Loading...
Peerless Industries PRS 274-W, PRS 274-S, PRS 274 User Manual

page 1 of 2

TECHNICAL DATA SHEET - PRS Series Projector Mount for InFocusLP-820 Projector

MODELS: PRS 274, PRS 274-S, PRS 274-W

R

The PRS Series Projector Mount is the most low profile mount available today and offers the easiest installation. It ships completely pre-assembled and offers unmatched versatility. It can be mounted to any common ceiling structure and is offered in multiple colors to complement any setting. It was specifically designed to save time and money when mounting projectors.

Features:

+5°/-20° Pitch, +/-10° Roll, 360° Yaw (when attached to an extension column), +/-15° Yaw (when flush mounted), which enables the image to be perfectly aligned with the screen

Mount completely pre-assembled to save you time

Independent roll, pitch, and yaw adjustments provide easy image alignment

Can be mounted directly to a single wood beam or concrete slab without disassembling the mount and without reinforcing the ceiling

Can attach to 1 1/2" extension column, 3/4" extension column, or 3/8" threaded rod

Armor Locksecurity screws pre-installed for a secure installation in minutes

Quickly release the projector for maintenance with the simple turn of a knob

Built in cord management access hole provides complete access to route cords through extension column to keep cords hidden

4 adjustment points allow a quick, simple installation

Final security lock down is optional to use

Easily and quickly attaches to projector-specific adapter plate

Offered in black, white, and silver to complement any setting

Low profile allows the projector to be close to the ceiling

Offers the fastest installation to reduce installation time and costs

PRS SERIES

PROJECTOR

GENERIC

MOUNT

 

ADAPTER PLATE

Accessories:

Ceiling Plates (various models available)

Cord Wrap (ACC 852, ACC 852S, ACC 852W)

Fixed and Adjustable length Extension Columns, 1 1/2" NPT (“EXT” or “ADJ” models)

Fixed length Extension Columns, 3/4" NPT (“FLP” models)

Armor Lock Plussecurity cable with Lock (ACC 020)

Armor Lock Plus security cable (ACC 021)

Side to Side Adjuster (ACC 830)

Dimensions:

For product dimensions, see page 2.

A R C H I T E C T S S P E C I F I C A T I O N S

The PRS Series Projector Mount shall be a Peerless model and shall be located where indicated on the plans. It shall feature

25°(+5°/-20°) pitch, 20°+(10°) roll, 360° yaw (when attached to an extension column), and +/-15° yaw (when flush mounted). It shall have a 25 lb load capacity. It shall have a quick release spring loaded screw for easy removal and installation of the projector. It shall be constructed of aluminum alloy finished in black, white, or silver. Assembly and installation shall be done according to instructions provided by the manufacturer.

Peerless Industries, Inc.

3215 W. North Ave. Melrose Park, IL 60160

708-865-8870 800-865-2112 Fax 708-865-2941 www.peerlessmounts.com

ISSUED: 02-27-06 SHEET NO: 056-9579-1

© 2005 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark and Armor Lock and Armor Lock Plus are trademarks of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

+ 1 hidden pages