Peerless Industries PAP 113, PAP 113-S, PAP 113-W User Manual

Loading...
Peerless Industries PAP 113, PAP 113-S, PAP 113-W User Manual

Installation and Assembly - Projector Adapter Plate for

Models: PAP 113, PAP 113-S,

Mitsubishimodel Mitsubishi XL1U Projector

PAP 113-W

IMPORTANT! Read entire instruction sheet before you start installation and assembly.

Before you start check the parts list below to make sure all of the parts shown are included.

WARNING

Installer must verify that the ceiling will safely support four times the combined weight of all attached equipment and hardware.

Parts List

 

Description

Qty.

PAP 113

PAP 113-S

PAP 113-W

BB

EE

AA

AA adapter plate

1

055-1186

055-4186

055-2186

BB

M4 x .7 x 12 mm socket pin screw

3

520-1079

510-2079

510-2079

 

 

 

CC 4 mm security wrench (for PAP only) 1

560-9646

560-9646

560-9646

 

 

 

DD

L bracket

2

055-1212

055-4212

055-2212

 

 

 

EE

M4 x .7 x 6 mm socket pin screw

2

520-1059

520-2059

520-2059

 

 

 

FF

adhesive foam pad

2

570-0008

570-0008

570-0008

 

 

 

 

CC

DD

Note: Actual parts may appear slightly different than illustrated.

 

FF

 

 

*Notch indicates front of projector.

Adhere foam pads (FF) to L-brackets (DD).

Turn projector upside down. Attach adapter plate

Secure projector by attaching two L-brackets to

(AA) to projector using three screws (BB).

adapter plate (AA) using two screws (EE).

 

Tighten all screws using 4 mm security allen

 

wrench (CC).

 

BB

EE

 

AA

*

AA

ADHERE PADS

TO L-BRACKETS

1 of 1

ISSUED:10-30-01 SHEET#: 055-9063-6 08-05-04

Visit the Peerless Web Site at www.peerlessindustries.com

For customer service call 1-800-729-0307 or 708-865-8870.

© 2004 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.