Peerless DST995 Installation Guide
DST995
95"
(241 cm)
MAX
225 lb
(102 kg)
COMPATIBILITY
MOD POLES COLUMNS ACCESSORIES
MOD-P100(-B), MOD-P150(-B), MOD-P200(-B),
MOD-P300(-B)
*MOD COLUMNS REQUIRE MOD-ATA
ADAPTER
EXT006 through EXT110,
AEC012018 through AEC1012,
ALU0090012 through ALU1012,
ADD series
1
2013-09-16 #:145-9028-4 (2013-10-31)
ACC-V800X
This page intentionally left blank.
2
2013-09-16 #:145-9028-4 (2013-10-31)
WARNING
Before installing make sure the supporting surface will support the combined load of the equipment and
hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail.
Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift
and position equipment. This product is intended for indoor use only. Use of this product outdoors could lead to
product failure or personal injury. Be careful not to pinch ngers when operating the mount. For support please
call customer care at 1-800-865-2112.
Symbols
To properly tighten screws: Tighten until screw head
makes contact, then tighten another 1/2 turn. Do not
overtighten screws.
1
Do not overtighten screws.
2
x3
WARNING
Screws must get
at least three full
turns and t snug.
Tools Needed for Assembly.
5/16"
(8mm)
3
+1/2
4
3
2013-09-16 #:145-9028-4 (2013-10-31)
Parts List
Description Qty Part #
A component box 1 145 -1782
B rear cover 1 145 -153 4
C pinch bracket 1 130 -1073
D yaw bracket 1 130 -150 0
E adapter bracket 1 145-1780
F snap bushing 2 5 90 -1149
G ber washer 1 540-9432
H retaining collar 1 1800-375
I 1/4" SAE at washer 8 540-9440
J M5 x 55mm socket pin screw 2 52 0-1193
K M5x 10mm socket pin screw 9 52 0-116 4
L M8 x 15mm socket pin screw 8 520 -1068
M M6 x 16mm socket pin screw 4 52 0-1132
N M5 nylock nut 2 53 0-1019
O 5/32" (4mm) security wrench 1 560-9646
(1)
B
rear cover
(1)
A
component
box
(1)
C
pinch bracket yaw bracket
(1)
D
4
(1)
E
adapter bracket
2013-09-16 #:145-9028-4 (2013-10-31)
Loading...