DS-S555-3X3
46" - 55"
(117 - 140 cm)
MAX
900 lb
(409 kg)
ENG
1
2014-07-30 #:009-9089-1
This page intentionally left blank.
2
2014-07-30 #:009-9089-1
WARNING
ENG - This product is designed to be installed on solid concrete. Hardware is included for solid concrete
installation. Before installing make sure the supporting surface will support the combined load of the equipment
and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product
may fail. Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to
safely lift and position equipment. This product is intended for indoor use only. Use of this product outdoors could
lead to product failure or personal injury. Be careful not to pinch fi ngers when operating the mount. For support
please call customer care at 1-800-865-2112.
ENG
ENG
ENG
Symbols
WARNING
ENG
Display center.
Tools Needed for Assembly.
x3
Screws must get at
ENG
least three full turns
Heavy
To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
1
and fi t snug.
3/8"
(10mm)
2
3
4
ENG
Do not overtighten screws.
+1/2
3/8"
(10mm)
3
2014-07-30 #:009-9089-1
Parts (Before beginning, make sure you have all parts shown below).
Parts List
Description Qty
A pedestal 2 146-T1132
B column 2 146-T1131
C extension 2 145-T1778
D cover 2 145-T1809
E adaptor bracket 18 145-T1792
F side support bracket 4 145-T1807
G vertical support bracket 6 145-T1806
H computer cover 1 145-T1930
I computer shelf 1 145-T1931
J dual cross support 3 145-T1924
K extension adaptor 2 145-T1935
L locking tab 4 145-T1936
M cord bracket 4 145-T1929
N cross support 3 145-T1816
O plate connections 6 145-T1821
P M8 x 16mm socket button screw 112 520-9527
Q M8 square nut 52 530-1066
R cover clip 8 590-0317
S M5 x 10mm type-F, socket pin screw 20 520-1164
T M5 x 12mm socket pin screw 4 520-1064
U 1/4" power bit 1 560-0263
V 5mm allen wrench 1 560-9640
W nylon shoulder washer 36 590-2233
X M6 x 12mm socket pin screw 36 520-1050
Y 4mm allen wrench 1 560-9646
Z M6 x 35mm screw 8 520-0717
AA rawl bolt #6913 8 5M9-381-H03
Part #
B
column
A
pedestal
(2)
(2)
C
extension
(2)
D
(2)
cover
(18)
E
adaptor bracket
(4)
F
side support
bracket
(6)
G
vertical support
bracket
4
2014-07-30 #:009-9089-1
(4)
L
locking tab
(3)
J
dual cross
support
(3)
N
cross support
(1)
H
computer cover
(1)
I
computer shelf
(2)
K
extension
adaptor
(8)
R
cover clip
V
5mm allen
wrench
Z
M6 x 35mm
(1)
(8)
(4)
M
cord bracket
W (36)
nylon shoulder
washer
(20)
S
M5 x 10mm
(6)
O
plate
connections
X (36)
M6 x 12mm
T (4)
M5 x 12mm
(
112
P
M8 x 16mm
Y (1)
4mm allen
wrench
AA
rawl bolt
)
(8)
(52)
Q
M8 square
nut
(1)
U
1/4" power
bit
5
2014-07-30 #:009-9089-1
1
x2
Do not fully tighten hardware
K
P
2
x2
TIGHTEN
CONNECTING
HARDWARE
Z (4)
A
Q
TOP VIEW
B
6
2014-07-30 #:009-9089-1
3
x2
C
TIGHTEN
CONNECTING
HARDWARE
B
7
2014-07-30 #:009-9089-1
4
x6
5
x2
P
Q
G
1/8"
(3mm)
1/8"
(3mm)
DISPLAY HEIGHT
TIGHTEN
CONNECTING
HARDWARE
8
DISPLAY HEIGHT
2014-07-30 #:009-9089-1
6-1
R
D
6-2
x2
M
9
T
L
TIGHTEN
CONNECTING
HARDWARE
L
T
M
TOP VIEW
2014-07-30 #:009-9089-1
4
7-1
ENG
Align base. Mark mounting holes.
7-2
ENG
Drill mounting holes into
supporting surface
(3" (76 mm) minimum
depth required).
3/8"
(10mm)
55.00"
(1397mm)
7-3
3/8"
(10mm)
ENG
Align base. Install using concrete anchors
provided.
3/8"
(10mm)
3"
(76mm)
ENG
Maximum 35 ft • lb (47 N.M.).
10
AA
55.00"
(1397mm)
ENG
Tighten.
2014-07-30 #:009-9089-1
8
Repeat for each cross support (x3).
Q (4)
P (8)
J
O (2)
O
11
N
2014-07-30 #:009-9089-1
9-1
Must install bottom row fi rst.
TIGHTEN
CONNECTING
HARDWARE (X4)
TIGHTEN
HARDWARE
(X2)
Cross supports must center on columns.
12
TIGHTEN
HARDWARE
(X2)
2014-07-30 #:009-9089-1
9-2
Must install middle row second.
TIGHTEN
CONNECTING
HARDWARE (X4)
TIGHTEN
HARDWARE
(X2)
Cross supports must center on colmuns.
13
TIGHTEN
HARDWARE
(X2)
2014-07-30 #:009-9089-1
9-3
Must install top row last.
TIGHTEN
CONNECTING
HARDWARE (X4)
TIGHTEN
HARDWARE
(X2)
Cross supports must center on columns.
14
TIGHTEN
HARDWARE
(X2)
2014-07-30 #:009-9089-1
10
Side support brackets must center on cross supports.
F
Q (2)
P (2)
15
2014-07-30 #:009-9089-1
11
Center adaptor brackets vertically on back of screen.
X
.98"
(25mm)
7.87"
(200mm)
3.94"
(100mm)
X
2.50"
(63mm)
0.91"
(23mm)
15.75"
(400mm)
2.50"
(63mm)
16
W
X
P
OR
x3
2014-07-30 #:009-9089-1
12-1
Must hang displays to bottom row fi rst; Secure pin
in "locked" position.
12-2
Must hang displays to middle row second; Secure
pin in "locked" position.
"LOCKED"
POSITION
17
"LOCKED"
POSITION
2014-07-30 #:009-9089-1
12-3
Must hang displays to top row last; Secure pin
in "locked" position.
"LOCKED"
POSITION
12-4
OPTIONAL: Insert M5 x 10mm type-F socket pin
screws to lock latches.
Y
S
18
2014-07-30 #:009-9089-1
Display Adjustment
IN
OUT
TILT FORWARD
SIDE
TILT BACKWARD
SIDE
SIDE
TILT RIGHT
TOP
SIDE
TILT LEFT
TOP
UP DOWN
ROTATE LEFT ROTATE RIGHT
19
2014-07-30 #:009-9089-1
13
14
I
1/8"
(3mm)
S (2)
I
TIGHTEN
CONNECTING
HARDWARE
20
I
H
2014-07-30 #:009-9089-1
15
Route cables through cord brackets.
M
M
21
2014-07-30 #:009-9089-1
This page intentionally left blank.
22
2014-07-30 #:009-9089-1
Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and
LIMITED FIVE-YEAR WARRANTY
workmanship, under normal use, for a period of fi ve years from the date of purchase by the original end-user (but in no case longer than
six years after the date of the product's manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any
product which fails to conform with this warranty.
In no event shall the duration of any implied warranty of merchantability or fi tness for a particular purpose be longer than the
period of the applicable express warranty set forth above. Some states do not allow limitations on how long a implied warranty lasts,
so the above limitation may not apply to you.
This warranty does not cover damage caused by (a) service or repairs by the customer or a person who is not authorized for such service
or repairs by Peerless, (b) the failure to utilize proper packing when returning the product, (c) incorrect installation or the failure to follow
Peerless' instructions or warnings when installing, using or storing the product, or (d) misuse or accident, in transit or otherwise, including
in cases of third party actions and force majeure.
In no event shall Peerless be liable for incidental or consequential damages or damages arising from the theft of any product,
whether or not secured by a security device which may be included with the Peerless
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty is in lieu of all other warranties, expressed or implied, and is the sole remedy with respect to product defects. No dealer,
distributor, installer or other person is authorized to modify or extend this Limited Warranty or impose any obligation on Peerless in
connection with the sale of any Peerless
This warranty gives specifi c legal rights, and you may also have other rights which vary from state to state.
®
product.
®
product. Some states do not allow the
23
2014-07-30 #:009-9089-1
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Email: tech@peerlessmounts.com
Ph: (800) 865-2112
Fax: (800) 359-6500
www.peerless-av.com
© 2014, Peerless Industries, Inc.
Peerless-AV Europe
Unit 3 Watford Interchange,
Colonial Way, Watford, Herts,
WD24 4WP, United Kingdom
Customer Care
44 (0) 1923 200 100
www.peerless-av.com
© 2014, Peerless Industries, Inc.
Peerless-AV de Mexico
Ave de las Industrias 413
Parque Industrial Escobedo
Escobedo N.L Mexico 66050
Servicio al Cliente
01-800-849-65-77
www.peerless-av.com
© 2014, Peerless Industries, Inc.
Loading...