Peerless-AV DS-ACC765 Installation

Installation and Assembly:

Cable Release Kit

Model: DS-ACC765

NOTE: Read entire instruction sheet before you start installation and assembly.

PartsList

Description Qty. Part#

A fastenerplate 4 145‐1144
B cable 4 600‐0226
C eyebolt 4 580‐0006

Before you start make sure all parts listed are included with your product.

B

1

1. Run cable (B) through hole
in pull-out mount assembly and
fastener plate (A) as shown.

2. Run cable (B) through hole
in release mechanism and up
through second row of holes in
fastener plate (A) as shown.

3. For easy accessibility:
Tape or secure loop end of
cable onto top of display or
wall.

REPEAT STEPS WITH
OPPOSITE SIDE OF VIDEO
WALL MOUNT.

B

HOLE

C

A

A

21

B

A

1 of 2

ISSUED: 06-09-11 SHEET #: 120-9111-1

Optional Eyebolt

If display is placed in recess and cable cannot be pull straight up, use eyebolt (C) in corner.

2

Run loop end of cable (B) though eyebolt (C) as shown.

LOOP

C

PULL DIRECTION

Position DS-ACC765 cables in locations as shown.

2

Additional Cable Release Kits may be required if more than three displays are mounted horizontally.

2 of 2

All other brand and product names are trademarks or registered trademarks of their respective owners.

ISSUED: 06-09-11 SHEET #: 120-9111-1

© 2010, Peerless Industries, Inc. All rights reserved.