Peerless-AV DCT800 Installation
Installation and Assembly - Multi-Display I-Beam Clamp for 4"-7" Beams
Maximum load rating 600 lb (272.2 kg) Combined weight
to all attached hardware and components is not to exceed
600 lb (272.2 kg)
Before you start make sure
all parts shown below are
included with your product.
D
B
C
A
IMPORT ANT! Read entire
instruction sheet before you
start installation and assembly.
PART # QTY. DESCRIPTION
A 128-0424 1 tray
B 128-1273 2 clamps for i-beam
C 520-1018 4 1/2-13 X 2" square head bolt
D 520-1019 4 1/2-13 X 1" carriage bolt
E 530-1008 4 lock nut 1/2-13
F 540-2005 4 flat washer 1/2-13
Parts List
Note: Some parts may appear slightly different than illustrated.
3" (76 mm)
adjustment range
Model:
DCT 900
B
F
E
WARNING
• If multi-display system, in combination with components exceeds 600 lb (272.2 kg) it therefore exceeds
the maximum load. Heavy Duty I-Beam Clamp with
Decoupler will not safely support a combined load
which exceeds 600 lb (272.2 kg)!
Note: For each step see corresponding illustration.
Attach brackets (B) to tray (A) using four 1/2-13 X
2" square head bolts (C), washers (F), and lock
nuts (E). Do not fully tighten. Start four 1/2-13 X 1"
carriage bolts (D) into clamps (B).
Adjust clamps (B) securely around I-Beam. Tighten
(C,F,E) securely. Tighten four bolts (D) securely.
Attach the extension column according to the
instructions provided with it. Use a level to make
sure the column is plumb and make adjustments as
necessary.
I-Beam
D
B
1 of 1
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 06-11-02 SHEET #: 128-9136-3 04-21-05
Loading...