Peerless CMR410 Datasheet

MODEL: *CMR 405, CMR 410

All dimensions:

inch
mm

housing

PEERLESS 5" SECURITY CAMERA MOUNT (CMR 405)
PEERLESS 7" SECURITY CAMERA MOUNT (CMR 410)

Attachment to mounting surface:

Camera Mount may be attached to wall or ceiling via the four large
mounting holes in the mounting plate, or directly to a standard electrical
outlet box via two small mounting holes. Hardware for attaching
Camera Mount to mounting surface is not included.

Camera attachment and position:

Angle of ball stud can be adjusted by loosening tension screw. Ball stud
can be removed for attachment to camera, then reattached and locked
into position at the desired angle by tightening tension screw. Ball stud
removal is not required for camera attachment.

mounting plate

.75 dia. cable/
wire access hole

ball stud

4.75
121

3.25
83

tension screw

* CMR 405 is not UL listed

CMR 410 CMR 405MODEL

MAX. LOAD 10 lbs 10 lbs

CAPACITY (4.5 kg) (4.5 kg)

WEIGHT .5 lbs .6 lbs

(.23 kg) (.27 kg)

SHIPPING 1 lb 1 lb

WEIGHT (.5 kg) (.5 kg)

A 4.125 in 6.5 in

(105 mm) (165 mm)

B 5.0 in 7.375 in

(127 mm) (187 mm)

A

.28 dia.

.15 dia.

housing

.75 dia. cable/wire
access hole

ISOMETRIC VIEW

This product must be

R

installed by a qualified,
professional installer.

2.125
54

3

76

(mounting plate)

BACK VIEW

Architects Specifications:

The Camera Mount shall be a Peerless model CMR 405 or CMR 410 and shall be located
where indicated on the plans. It shall be constructed of nylon to eliminate ground loop
problems. It shall feature a ball and socket design for a wide range of tilt and swivel. The
mounting hole pattern shall allow for attachment to a wall or ceiling, or direct attachment to
an electrical outlet box. Assembly and installation shall be done according to instructions
provided by the manufacturer.

© 2007 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.

B

SIDE VIEW

TECHNICAL DATA SHEET
LIGHT DUTY CAMERA MOUNT

Peerless Industries, Inc.

3215 W. North Ave. phone: [phone]
Melrose Park, IL 60160 fax: [phone]

ISSUED: 2-27-97 SHEET NO:050-9501-5 01-03-07 page 1 of 1

Patent Pending