Peerless-AV ACC953 Installation [en, es, fr]
Installation and Assembly:
Accessory Shelf
Model: ACC953
for Large Pivot and Articulating Mounts
Max Load Capacity: 15 lb (6.8 kg)
2300 White Oak Circle • Aurora, IL 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com
ISSUED: 09-26-11 SHEET #: 120-9123-4 07-12-12
NOTE: Read entire instruction sheet before you start installation and assembly.
WARNING
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact
your local distributor.
• This product should only be installed by someone of good mechanical aptitude, has experience with basic building
construction, and fully understands these instructions.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Never exceed the Maximum Load Capacity. See page one.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal
injury.
Tools Needed for Assembly
• phillips screwdriver
• level
• utility knife
• adjustable wrench
Before you begin, make sure all parts shown are included with your product.
Parts List
Description Qty.
A horizontal bracket 2 125-1259
B shelf 2 125-1279
C mount bracket 2 125-1266
D adjustment bracket 2 125-1267
E washer 14 540-9400
F nut 4 530-1019
G cover 2 125-1274
H left cap 2 125-1275
I right cap 2 125-1276
J M5 x 10mm self tapping screw 10 520-9250
Parts may appear slightly different than illustrated.
Part #
E
J
A
B
F
C D
HG I
2 of 14
ISSUED: 09-26-11 SHEET #: 120-9123-4 07-12-12
Connect two mount brackets (C) and two
adjustment brackets (D) with two screws (J) and
1
two washers (E) as shown. NOTE: Do not fully
tighten screws (J) until step 5.
Attach the assembled brackets to display mount
with two screws (J) and two washers (E) as shown.
2
C
J
E
D
Attach shelves (B) to horizontal brackets (A) using
four screws (J), eight washers (E) and four
3
nuts (F).
DISPLAY MOUNT
E
J
Attach horizontal brackets (A) to adjustment
brackets (D) using two screws (J) and two washers
4
(E).
B
E
F
A
J
E
D
A
E
J
3 of 14
ISSUED: 09-26-11 SHEET #: 120-9123-4 07-12-12
Adjust accessory shelf to desired height then
tighten screws (J).
5
J
Use a utility knife to cut covers (G) to fi t around
adjustment brackets (D) and shelves (B) on
6
horizontal brackets (A). NOTE: In order to break
the caps apart you may have to bend covers (G)
on the cut marks.
G
Attach covers (G) to horizontal brackets (A). Attach
left cap (H) and right cap (I) to horizontal brackets
7
(A).
I
H
G
4 of 14
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 09-26-11 SHEET #: 120-9123-4 07-12-12
© 2012, Peerless Industries, Inc. All rights reserved.
Instalación y montaje:
Estante para accesorios de pivote de gran tamaño y
articulación de montes
Modelos: ACC953
Capacidad Máxima de Soportar Carga: 15 lb (6.8 kg)
2300 White Oak Circle • Aurora, IL 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com
PUBLICADO: 09-26-11 HOJA #: 120-9123-4 07-12-12
Loading...