Peerless Industries ACC919 User Manual
Installation and Assembly - Security Fasteners for 10" - 25"
Description Qty. Part #
AA
M4 x 10 mm serrated washer head socket pin screw 4 510-1060
BB
M4 x 20 mm serrated washer head socket pin screw 4 510-1061
CC
M6 x 12 mm serrated washer head socket pin screw 4 510-1050
DD
M6 x 20 mm serrated washer head socket pin screw 4 510-9554
EE
M6 x 30 mm serrated washer head socket pin screw 4 510-1067
FF
.198" x .313" x .437" H retaining spacer 4 590-5005
GG
4 mm security allen wrench 1 560-9646
HH
M5 X 6 mm socket pin screw 5 520-1114
Parts List
®
LCD Displays with VESA
75, VESA 100, VESA 200 x 100 and
VESA 200 x 200 Mounting Patterns
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
AA
Model: ACC919
HH
FF
BB
CC
DD
GG
WARNING
• If screws don't get three complete turns in the display inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to display or product may fail.
1-1 1-2
NOTE: For VESA 200mm and 200 x 100mm
patterns, see following page.
FOR VESA
Choose hole pattern as shown below. Attach hook
bracket to back of display using four M4 x 10mm
screws (AA) as shown below.
*NOTE: If hole pattern is in a pocket, attach hook
bracket to back of display using four M4 x 20mm
screws (BB) and four retaining spacers (FF) as
indicated below.
®
75 MOUNTING PATTERN:
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket to back of display using four M4 x 10mm
screws (AA) as shown below.
EE
AA
AA
BRACKET
*For displays with a
hole pattern in a pocket,
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307
spacers (FF) go between
hook bracket and display.
FF
1 of 3
BRACKET
ISSUED: 07-18-05 SHEET #: 095-9245-4 06-13-11
Attaching Adapter Plate to Screen with VESA 200 x 100 or 200 x 200
Mounting Pattern
Attach hook bracket to adapter plate using four
2
M5 x 6mm screws (HH) and #10 washers as shown.
#10 WASHER
ADAPTER
BRACKET
HH
WARNING
• If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not
tightly secured, damage may occur to screen or product may fail.
FOR VESA 200 x 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter
2-1 2-2
plate to back of screen using four
M4 x 10mm screws (AA) as shown below.
*NOTE: If screw (AA) gets less than three threads of
engagement, attach adapter plate to back of screen
using four M4 x 20mm screws (BB) and four spacers
(FF) as indicated below.
FOR VESA 200 x 200 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter
plate to back of screen using four
M6 x 12mm screws (CC) as shown below.
*NOTE: If screw (CC) gets less than three threads of
engagement, attach adapter plate to back of screen
using four M6 x 20mm screws (DD). If screw (DD)
still gets less than three threads of engagement, use
four M6 x 30mm screws (EE).
AA
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307
*For screens with a
hole pattern in a pocket,
spacers (FF) go between
adapter plate and screen.
FF
2 of 3
CC
ISSUED: 07-18-05 SHEET #: 095-9245-4 06-13-11
Loading...