![](/html/61/61ee/61eea91a923b7d91b78b0d06cdbf268f3a2783b19f1888783c3e62c72ff1fbbd/bg1.png)
Installation and Assembly - Flat Panel Accessory for
VCR/DVD Mount
IMPORTANT! Read instruction sheet before you start installation and assembly.
Before you start make sure all parts listed are included with your product.
Models: ACC931,
ACC931-S
Parts ACC931 ACC931-S
Description Qty. Part # Part #
AA VCR/DVD bracket 1 201-1161 201-4161
BB M5 x 8 mm phillips screw 4 570-0005 570-0005
CC M5 x 20 mm phillips screw 4 510-1208 510-1208
DD spacer 4 540-1057 540-1057
Some parts may appear slightly different than illustrated.
AA
BB
CC
WARNING
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb
(30-40 kg • cm).
Attach VCR/DVD bracket (AA) to back of adapter
plate (sold separately) using the four screws
included with adapter plate (sold separately) as
shown below. Tighten screws using 4 mm security
allen wrench included with adapter plate.
Note: Some parts may appear slightly different
than illustrated.
Attach VCR/DVD mount (sold separately) to VCR/
21
DVD bracket (AA) using four M5 x 8 mm philips
screws (BB) as shown below.
Note: If using model SP850-UNL mount, Attach
VCR/DVD mount to VCR/DVD bracket (AA) using
four M5 x 20 mm philips screws (CC) and four
spacers (DD) as shown below.
DD
AA
AA
Spacers (DD) are used between
bracket (AA) and VCR/DVD
mount on model SP850-UNL only
DD
BB or CC
1 of 1
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
© 2007, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 07-03-07 SHEET #: 120-9037-2 08-27-10