Peerless-AV ACC666 Installation
Installation and Assembly - Threaded Rod adapter and Kit.
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Model: ACC 810,
ACC 820
Parts List
Before you start make sure all parts listed are included with your product.
ACC 820
QTY. DESCRIPTION
A 4 1/2-13 x 36” threaded rod
B 2 1/2-13 coupling nut
C 8 1/2-13 nylock nut
Some parts may appear slightly different than illustrated.
ACC 820 - Threaded Rod Kit.
For added length, connect two threaded
rods (A) using coupling nut (B). Use
nylock nut (C) to lock threaded rod (A) to
appropriate connections.
ACC 810 - Threaded Rod Adapter.
Note: ACC 810 is required to convert 1/2-13
threaded rod connection to 1-1/2-11.5 NPT.
Fasten threaded rod adapter (D) to threaded
rod (A). Leave a minimum of 1/4” of thread
from the threaded rod showing then lock into
place using nylock nut (C)
ACC 810
QTY. DESCRIPTION
C 1 1/2-13 nylock nut
D 1 threaded rod adapter
C
A
B
A
A
D
C
1 of 1
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
© 2001 Peerless Industries, Inc. All rights reserved.
Peerless is a trademark of Peerless Industries, Inc.
D
C
ISSUED: 08-03-01 SHEET #: 100-9002revA
Loading...