![](/html/51/5175/5175f1b7b9a349c21d0041c77fefb1f4f3f0697fdf219d97ed82d201ea8205ab/bg1.png)
Model ACC557 Truss Ceiling Adapter, adapts the Jumbo™
or Jumbo 2000™ Ceiling Mount to square, round, rectangular or I-beam type trusses [up to 3” (76mm) in diameter].
Adapter can be used
with or without an extension column.
Extension column fitting
(columns sold separately)
Model: ACC557
Features:
l Heavy gauge cold rolled steel construction.
l Scratch resistant black fused epoxy finish.
l Accommodates various truss types.
Accessories:
l Fixed length extension columns
l (EXT models).
l Adjustable length extension columns
l (ADJ models).
For use with square, round,
rectangular or I-beam trusses.
Maximum dimensions to
accommodate truss ceiling plate
are shown. Truss must be
capable of supporting four
times the load of attached
hardware and components.
MAX. Load -
1200 lbs. (546 kg.)1200 lbs. (546 kg.)
1200 lbs. (546 kg.)
1200 lbs. (546 kg.)1200 lbs. (546 kg.)
3.0"
76mm
3.5"
89mm
3.0"
76mm
This product is intended for use with UL
R
Listed products and must be installed by a
qualified professional installer.
3.0"
76mm
A R C H I T E C T S S P E C I F I C A T I O N S
The ceiling fixture shall be a Peerless model ACC557 Truss Ceiling Adapter and shall be mounted where indicated
on the plans. The adapter shall adapt a Jumbo Ceiling Mount to a variety of truss types. It shall be constructed of heavy gauge cold
rolled steel. The finish shall be scratch resistant black fused epoxy. Assembly and installation shall be done according to instructions
provided by the manufacturer.
T E C H N I C A L D A T A S H E E T
Truss Ceiling Adapter
Peerless Industries, Inc. 3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941 www.peerlessindustries.com
© 2001 Peerless Industries, Inc. All rights reserved.
Peerless is a trademark of Peerless Industries, Inc.
Issued: 07-29-99 Sheet No. 128-9522-1 09-15-03
page 1 of 1