![](/html/cf/cf69/cf69be785c4796cbd02656129527c5f4c0452f08aa8bf407225e19dea27f0416/bg1.png)
Installation and Assembly - I-Beam Clamps
Models:
This product must be
R
For customer service call 1-800-729-0307 or 708-865-8870. Visit the Peerless Web Site at www.peerlessindustries.com.
installed by a qualified,
professional installer.
IMPORTANT! Read entire instruction sheet before
you start installation and assembly .
ACC558
ACC559
Before you start make sure
all parts shown below are
included with your product.
F
E
Maximum load rating 250 lbs. (113 kg) Com-
bined weight to all attached hardware and
components is not to exceed 250 lbs. (113 kg)
B
A
Peerless Industries, Inc.
3215 W. North Avenue
Melrose Park, IL 60160
C
4" (102 mm) or 5" (127 mm)
adjustment range
D
B
PART # QTY. DESCRIPTION
A 128-1187 1 tray (ACC559)
128-1190 1 tray (ACC558)
B 128-1189 2 clamp for I-beam
C 520-9215 4 carriage bolt 3/8-16 X 3/4
D 520-2560 4 cone bolt 3/8-16 X 2
E 530-9310 4 lock nut 3/8-16
F 540-9454 4 flat washer 3/8 x 3/4 x 1/8
G 520-9250 2 M5 x .8 x 10mm phillips screw
Parts List
M5 screws (G) are provided to secure extension column (sold
separately) to threaded fitting in tray. Refer to extension column
instruction sheet for details.
Note: Some parts may appear slightly different than illustrated.
Note: For each step see corresponding illustration.
Attach clamps (B) to tray (A) using four 3/8-16 x 3/4 carriage
bolts (C), washers (F), and lock nuts (E). Do not fully tighten.
Start four 3/8-16 x 2 bolts (D) into clamps (B).
Adjust clamps (B) securely around I-Beam. Tighten (C,F,E)
securely. Tighten four bolts (D) securely. Attach the extenÂsion column according to the instructions provided with it.
Use a level to make sure the column is plumb and make
adjustments as necessary.
G
I-Beam
D
B
1 of 1
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
ISSUED: 05-06-99 SHEET #: 128-9021-2 03-24-06