Installation and Assembly:
Accessory Laptop Cooling Tray
Model: ACC329
DESKTOP ARM
(SOLD SEPARATELY)
For use with:
LCT420A
LCW420A
LCT620A
LCW620A
LCT620AD
LCW620AD
Max Load Capacity: 19.8 lb (9 kg)
2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com
ISSUED: 07-10-12 SHEET #: 120-9160-1
NOTE: Read entire instruction sheet before you start installation and assembly.
y
WARNING
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact
your local distributor.
• This product should only be installed by someone of good mechanical aptitude, has experience with basic building
construction, and fully understands these instructions.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Never exceed the Maximum Load Capacity. See page one.
• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal
injury.
Tools Needed for Assembly
• phillips screwdriver
• 4mm allen wrench
Before you begin, make sure all parts shown are included with your product.
Parts List
Description
A laptop tray 1
B screw knob 4
C USB powered fan 1
D square pad 2
Parts may appear slightly different than illustrated.
C
B
Qt
A
D
2 of 6
ISSUED: 07-10-12 SHEET #: 120-9160-1
Loosen tilt screw and set screw shown in detail 1 and 2 to adjust height of arm and degree of tilt on adapter plate to
1
desired location. Adjust arm and adapter plate then retighten screws.
ADAPTER PLATE
fi g. 1.1
+80/-20°
DETAIL 1
+/- 45°
TILT SCREW
fi g. 1.2
RETIGHTEN
SCREWS
ARM
DETAIL 2
SET SCREW
3 of 6
ISSUED: 07-10-12 SHEET #: 120-9160-1
Attach laptop tray (A) to adapter plate of desktop arm with four screw knobs (B).
2
A
B
ADAPTER PLATE
Apply two square pads (D) to top of laptop tray.
3
D
Open laptop and place into cradle of laptop tray (A).
4
A
4 of 6
CRADLE
ISSUED: 07-10-12 SHEET #: 120-9160-1
Press fi t USB powered fan (C) into ventilation grid of laptop tray underneath laptop fan. No screws required.
5
NOTE: Be sure label of fan faces away from laptop tray.
fi g. 5.1 fi g. 5.2
LABEL OF FAN
FACES A WAY
FROM LAPTOP
A
USB CABLE
C
Hold laptop securely to tray, make fi nal height or tilt adjustments then tighten all screws as shown in detail 3 and 4.
6
TILT SCREW
SET SCREW
DETAIL 3
+/- 45°
+80/-20°
DETAIL 4
5 of 6
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 07-10-12 SHEET #: 120-9160-1
© 2012 Peerless Industries, Inc. All rights reserved.
LIMITED FIVE-YEAR WARRANTY
Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal
use, for a period of fi ve years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product’s manufacture).
In no event shall the duration of any implied warranty of merchantability or fi tness for a particular purpose be longer than the period of the applicable
express warranty set forth above. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
This warranty does not cover damage caused by (a) service or repairs by the customer or a person who is not authorized for such service or repairs by Peerless,
(b) the failure to utilize proper packing when returning the product, (c) incorrect installation or the failure to follow Peerless’ instructions or warnings when installing,
In no event shall Peerless be liable for incidental or consequential damages or damages arising from the theft of any product, whether or not secured
by a security device which may be included with the Peerless® product. Some states do not allow the exclusion or limitation of incidental or consequential
This warranty is in lieu of all other warranties, expressed or implied, and is the sole remedy with respect to product defects. No dealer, distributor, installer or other
person is authorized to modify or extend this Limited Warranty or impose any obligation on Peerless in connection with the sale of any Peerless® product.
At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
using or storing the product, or (d) misuse or accident, in transit or otherwise, including in cases of third party actions and force majeure.
damages, so the above limitation or exclusion may not apply to you.
This warranty gives specifi c legal rights, and you may also have other rights which vary from state to state.
www.peerless-av.com
© 2012 Peerless Industries, Inc.
6 of 6
ISSUED: 07-10-12 SHEET #: 120-9160-1
Loading...