![](/html/9d/9daa/9daa64dd56f6564dbde7ecff9f044fae9fc2da93fcb07b292c2bad1ef0e6bbdd/bg1.png)
Installation and Assembly - Safety Belt Accessory
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Before you start make sure all parts shown below are included with your product.
Model: ACC322
Parts List
Description Qty. Pa rt #
safety belt 1 1PM-99TD01P (fast pack 083-8012)
A
A
Note: Some parts may appear slightly different than illustrated.
Wrap safety belt (A) around component and mount as shown in figure 1.1. Position belt close to the back of the
1
component being secured (in line with the back feet) as shown in figure 1.2.
Insert loose end of safety belt into the buckle end as shown in figure 1.3. Pull to tighten securely.
fig 1.1
GENERIC COMPONENT
MOUNT (SOLD SEPARATELY)
MODEL PS200 SHOWN
GENERIC COMPONENT
fig 1.2
A
A
A
fig 1.3
1 of 1
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 06-19-07 SHEET #: 120-9036 -2 2-27-08
© 2007, Peerless Industries, Inc. All rights reserved.