Installation and Assembly:
Smar tMount™ Uni versal Tilt Wall Mount
for 10" - 24" LCD Flat Panel Screens
Models: ST 630P, ST 630P-S, ST 630, ST 630-S
This product is intended for use with UL
Features:
• Fits 10" to 24" LCD flat panel screens
• One-touch tilt for effortless positioning and adjustment of the screen
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 865-2112 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09
R
Max UL Load Capacity: 80 lb (36.3 kg)
Listed products and must be installed by a
qualified professional installer.
Note: Read entire instruction sheet before you start installation and assembly.
WARNING
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call Peerless customer care at 1-800-865-21 12.
• This product should only be installed by a qualified professional.
• Make sure that the wall will safely support the combined load of the equipment and all attached hardware and components.
• Never exceed the Maximum UL Load Capacity of 80 lb (36.3 kg).
• If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an
"edge to edge" stud finder is highly recommended.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws firmly , but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
Tools Needed for Assembly
• stud finder ("edge to edge" stud finder is recommended)
• phillips screwdriver
• drill
• 1/4" bit for concrete and cinder block wall
• 1/2" bit for metal stud wall
• 5/32" bit for metal or wood stud wall
• level
Accessories
• Metal Stud Fastener Kit (ACC 215) (Not evaluated by UL)
• Video Conferencing Shelf (ACC 309) (Not evaluated by UL)
• Accessory Shelves (PM 600, PM 610) (Not evaluated by UL)
Table of Contents
Parts List..............................................................................................................................................................................3
Installation to Single Wood Stud Wall...................................................................................................................................4
Installation to Solid Concrete or Cinder Block .......................................................................................................................5
Attaching Adapter Plate to Flat Panel Screen ......................................................................................................................6
Installing and Removing Flat Panel Screen ...........................................................................................................................7
Adjusting the Tilt Angle of the Flat Panel Screen..................................................................................................................7
For customer care call (800) 865-21 12 or (708) 865-8870.
2 of 7
ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09
Parts List
De scrip tion Qty Part # Part # Part # P art #
adapter plate 1 095-1346 095-4346 095-1346 095-4346
A
til t assembl y 1 095-0359 095-0360 095-0359 095-0360
B
All igat or® anchor 2 590-0097 590-0097 590-0097 590-0097
C
M4 x 10 mm phillips screw 4 504-9012 504-9012 504-9012 504-9012
D
M4 x 20 mm phillips screw 4 504-9020 504-9020 504-9020 504-9020
E
retaining s pacer 4 590-5005 590-5005 590-5005 590-5005
F
#14 x 2-1/2" hex head wood screw 2 5S1-015-C03 5S1-015-C03 5S1-015-C03 5S 1-015-C03
G
M5 x 6 mm screw 1 520-1023 520-1023 520-1114 520-1114
H
sec uri t y driver 1 560-1133 560-1133
I
ST 630P ST 630P -S ST 630 ST 630-S
A
B
GC D E F
H
I
3 of 7
ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09