Pedrollo ALRED135m115V Specifications
AL-RED
Stainless steel centrifugal pumps
AL-RED -4
Pump body: stainless steel AISI 304
Impeller: stainless steel AISI 304
Shaft: stainless steel AISI 431
AL-RED -6
Pump body: stainless steel AISI 316L
Impeller: stainless steel AISI 316L
Shaft: stainless steel AISI 316L
Clean water
Domestic use
Agricultural use
Industrial use
PERFORMANCE RANGE
• Maximum ow rate 180 l/min (10.8 m³/h)
• Maximum head 60 m
APPLICATION LIMITS
• Manometric suction lift up to 7 m
• Liquid temperature between -10 ° C and +90 °C
• Ambient temperature between +40 °C
• Max. working pressure:
– 6 bar for AL-RED 600-610-620 -4
AL-RED 600-610-620 -6
– 8 bar for AL-RED 650-660-670-650M-660M-670M -4
AL-RED 650-660-670-650M-660M-670M -6
• Continuous service S1
CONSTRUCTION AND SAFETY STANDARDS
EN 60335 -1
IE C 60 335-1
CE I 61-15 0
EU REGULATION N. 547/2012
CERTIFICATIONS
Company with management system certied DNV
ISO 9001: QUALITY
EN 60034-1
IE C 60 034 -1
CEI 2-3
INSTALLATION AND USE
Suitable for use with clean water and with liquids that are not
chemically aggressive towards the materials from which the pump
is made. Because of its design features these centrifugal pumps
are recommended for use in domestic, agricultural and industrial
applications. All the components in contact with the pumped
liquid are in stainless steel AISI 304 or AISI 316L thus guaranteeing
complete hygiene and maximum resistance against corrosion.
The pump should be installed in an enclosed environment or
sheltered from inclement weather.
PATENTS - TRADE MARKS - MODELS
• AL-RED® Registered trade mark n. 0001575587
OPTIONS AVAILABLE ON REQUEST
• Special mechanical seal
• IP X5 class protection for AL- RED 650 -660- 670-650M-660M-670M
52 | GENERAL CATALOGUE 60 Hz
0 10 20 30 40 50
US g.p.m.
feet
CHARACTERISTIC CURVES AND PERFORMANCE DATA 60 Hz n= 3450 min HS= 0 m
0 10 20 30 40
65
AL-RED 670
AL-RED 660
AL-RED 650
AL-RED 620
AL-RED 610
AL-RED 600
AL-RED -4
AL-RED -6
AL-RED 670M
AL-RED 660M
AL-RED 650M
4
Head H (metres)
60
55
50
45
40
35
30
25
20
15
10
5
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190
0 1 2 3 4 5 6 7 8 9 10 11
Flow rate Q
4
Imp g.p.m.
l/min
m³/h
200
150
100
50
0
0 0.6 1.2 2.4 3.6 4.8 6 7. 2 8.4 9.6 10.8
0 10 20 40 60 80 100 120 140 160 18 0
22 21. 5 21 19.5 17 14 10
28.5 28 27. 5 25.5 23.5 20.5 17
37 36.5 36 34 31.5 28.5 24
43.5 – 42 40.5 38.5 36 32.5 28
51 – 49.5 48 46 44 41 37 32
60 – 59 57 55.5 53 50.5 47 43.5 38
36 – – 34 32.5 30.5 28.5 26 23 20 16
46 – – 43.5 42 40 38 36 33 30 26
53 –
–
51 49.5 48 46 43.5 41 37.5 34
IE2
IE3
IE3
Q
H
m³/ h
l/min
metres
MODEL POWER (P)
Single-phase Three-phase kW HP
AL-REDm 600-4
AL-REDm 600-6
AL-REDm 610 -4
AL-REDm 610 -6
AL-REDm 620-4
AL-REDm 620-6
AL-REDm 650-4
AL-REDm 650-6
AL-REDm 660-4
AL-REDm 660-6
AL-REDm 670-4
AL-REDm 670-6
AL-REDm 650M-4
AL-REDm 650M-6
AL-REDm 660M-4
AL-REDm 660M-6
AL-REDm 670M-4
AL-REDm 670M-6
Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3B.
Performance class of the three-phase motor (IE C 60034 -30 -1)
AL-RED 600-4
AL-RED 600-6
AL-RED 610-4
AL-RED 610-6
AL-RED 620-4
AL-RED 620-6
AL-RED 650-4
AL-RED 650-6
AL-RED 660-4
AL-RED 660-6
AL-RED 670-4
AL-RED 670-6
AL-RED 650M-4
AL-RED 650M-6
AL-RED 660M-4
AL-RED 660M-6
AL-RED 670M- 4
AL-RED 670M- 6
0.37 0.50
0.60 0.85
0.75 1 IE3
1.1 1.5
1.5 2
2.2 3
1.1 1.5
1.5 2
2.2 3
GENERAL CATALOGUE 60 Hz | 53
AL-RED -4
POS. COMPONENT CONSTRUCTION CHARACTERISTICS
1 PUMP BODY Stainless steel AISI 304
2 BODY BACKPLATE Stainless steel AISI 304
3 IMPELLER Stainless steel AISI 304
4 MOTOR SHAFT Stainless steel AISI 431
5 MECHANICAL SEAL
6 BEARINGS
7 CAPACITOR
8 ELECTRIC MOTOR AL-RED m: single-phase 220 V - 60 Hz with thermal overload protector incorporated into the winding.
Pump Seal Shaft Materials
Model Model Diameter Stationary ring Rotational ring Elas tomer Spring
AL-RED 600-4, 610-4 AR -12 Ø 12 mm Ceramic Graphite NBR AISI 304
AL-RED 620-4 AR -14 Ø 14 mm Ceramic Graphite NBR AISI 304
AL-RED 650 -4, 650M-4
AL-RED 660- 4, 660M- 4
AL- RED 670- 4, 670M- 4
Pump Model
AL-RED 600-4, 610-4 6201 ZZ / 6201 ZZ
AL-RED 620-4 6203 ZZ / 6203 ZZ
AL-RED 650 -4, 650M-4
AL-RED 660- 4, 660M- 4
AL- RED 670- 4, 670M- 4
Pump Capacitance
Single-phase
AL-REDm 600 -4 10 μF - 450 VL 25 μF - 250 VL
AL-REDm 610 -4 14 μF - 450 VL 25 μF - 250 VL
AL-REDm 620 -4 20 μF - 450 VL 60 μF - 300 VL
AL-REDm 650-4, 650M-4 25 μF - 450 VL 60 μF - 250 VL
AL-REDm 660-4, 660M-4 31.5 μF - 450 VL 60 μF - 250 VL
AL-REDm 670-4, 670M-4 50 μF - 450 VL 80 μF - 250 VL
AL-RED : three-phase 220/380 V - 60 Hz or 220/440 V - 60 Hz.
➠ The three-phase pumps are fitted with high performance motors up to
P=0.60kW in class IE2 and from P=0.75 kW in class IE3 (IEC 60034-30-1)
– Insulation: class F
– Protection: IP X4
FN -18 Ø 18 mm Graphite Ceramic NBR AISI 316
6204 ZZ / 6204 ZZ
(220 V) (110 V o r 127 V)
1 3 5 4 8
54 | GENERAL CATALOGUE 60 Hz
66 72
Loading...