®
pedaltrain
Installation Instructions:
• Spark power supply unit
• 1 of the 2 included mounting brackets
• 2 included mounting screws
1.
Place Spark under your Pedaltrain, in
the power supply mounting channel.
• Included Hex wrench
• Any model Pedaltrain pedal board (not included)
2.
Choose the bracket that best fits your
Pedaltrain's rail spacing.
4.3.
Place mounting screws through the holes
in the bracket, into the threaded holes on
the bottom side of Spark. Finger tighten.
NOTE:
Spark was designed to be installed over your
Pedaltrain hook-and-loop or Dual Lock.
For more information and technical specifications visit pedaltrain.com/spark.
© 2018 Pro Stage Gear LLC | help@pedaltrain.com | pedaltrain.com
Use the hex wrench to tighten the
mounting screws.
Attach your DC power cables and
enjoy!
Loading...