Peavey UA 35T II User Manual

OPERATING INSTRUCTIONS

Utility Amplifier

CAUTION: Risks of electrical shockÑDO NOT OPEN
CAUTION: To reduce the risk of electric shock, do not remove cover. No
user serviceable parts inside. Refer Servicing to qualified service
personnel.

Intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
persons.

Intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the product.

UA

ª

35T II

FEATURES

¥ 35 watts into 4 ohms
¥ Mic/page inputs (screw terminals)
¥ Mic/page select switch
¥ Dedicated program input (screw terminals

and RCA jacks)
¥ Bass and treble controls
¥ Mic/page level control
¥ AUX level control
¥ Direct 4 ohms output (screw terminals)
¥ Completely isolated 8 ohms, 25 volt, and

70 volt outputs (screw terminals)

¥ Shelf-top or wall-mountable

chassis

DESCRIPTION

The UAª 35T II is a high quality utility amplifier ideally
suited for varying installation requirements. It produces 35 watts
into 4 ohms and 8 ohms direct connections plus a broad range
of line amplification. Level controls are provided for mic/page
and AUX. The mic/page input is accessed via screw terminals or
RCA jacks. Bass and treble controls are functional on the total
system (mic/page/AUX). When a signal is present at the
mic/page input, the AUX input is muted. This feature is internally
defeatable when required.

Twenty-five and seventy volt line output capability is
standard equipment, and the unit is packaged for shelf or wall
mounting convenience. The user-friendly control layout, coupled
with state-of-the-art circuit design, ensure reliable long-term
operation and smooth trouble-free installation.

WALL OR SHELF MOUNTING

The UA 35T II can be mounted on a vertical or horizon­tal surface using the brackets formed on the bottom panel. For
mounting on a wooden or paneled surface, use No. 6 x 1/2" or
larger wood screws. For mounting onto a masonry or drywall
type surface, use fasteners that are designed for this purpose.

WARNING!

DO NOT ATTEMPT TO INSTALL THIS UNIT WHILE IT OR
ANY CONNECTING UNITS ARE POWERED ON. RISK OF
ELECTRICAL SHOCK EXISTS IF ALL UNITS ARE NOT
POWERED OFF DURING INSTALLATION. TO PREVENT
ELECTRICAL SHOCK OR FIRE HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.

MIC/PAGE LEVEL CONTROL (1)

Controls the signal level at the mic/page inputs. (See mic/page
switch (7).)

AUX LEVEL CONTROL (2)

Controls the signal level at the AUX inputs.

HIGH EQ CONTROL (TREBLE) (3)

Active equalization control that adjusts the high frequency
response. Clockwise rotation boosts highs while counterclock­wise rotation provides a cut (reduction) of the high frequencies
(±10 dB).

LOW EQ CONTROL (BASS) (4)

Active equalization control that adjusts the low frequency
response. Clockwise rotation boosts lows while counterclockwise
rotation provides a cut (reduction) of the low frequencies (±10
dB).

AUX IN (5)

Accepts signals from other sources, such as another mixer or
background music source. Signal level at this input is controlled
by the AUX level control and is fed to the Master output.

POWER LED (6)

Green LED illuminates when power is being supplied to the unit.

1

7

8

9

5

4

6

3

2

2