Peavey SRC 6024, SRC 6032 User Manual
Specifications and Main Features
- Model: SRC 6024/6032 Sound Reinforcement Consoles
- Input Requirements:
- Microphone Input:
- Impedance: 2K Ohms
- Maximum Gain: +56 dB
- Minimum Gain: -24 dB
- Connector: XLR
- Line Input:
- Impedance: 20K Ohms
- Maximum Gain: +36 dB
- Minimum Gain: -14 dB
- Connector: 1/4" TRS
- Insert:
- Impedance: 20K Ohms
- Connector: 1/4" TRS
- Tape Input:
- Impedance: 10K Ohms
- Connector: RCA (Stereo)
- AUX Return:
- Impedance: 1/4" TRS
- Maximum: +21 dBu
- Output Requirements:
- Master L/R Output:
- Load impedance: 600 Ohms
- Nominal level: +4 dBu
- Connector: XLR
- Sub Master Output:
- Load Impedance: 600 Ohms
- Nominal Level: +4 dBu
- Connector: XLR
- AUX Send:
- Load Impedance: 600 Ohms
- Nominal Level: +4 dBu
- Connector: XLR
- Gain:
- Mic Input to Master Output: 83 dB (Max Gain)
- Line Input to Master Output: 63 dB (Max Gain)
- Frequency Response:
- 20Hz to 40kHz + 0.5dB/-3dB
- Total Harmonic Distortion:
- <0.015% (20Hz to 20kHz)
- Noise:
- EIN: -129 dBu (Terminated 150 Ohms)
- CMRR:
- Mic Input: at least 60dB (20-20khz)
- Meters:
- Submasters: Peak readout with 12 segments
- L/R Master: Delta VU, 12 input segments along with peak and average level indicators
- Faders:
- Measuring 100 mm Log
- Power:
- Power Transformer as External Unit
- Nominal Power: 100 Watts, Input Power: 100 VAC,120 VAC,230 VAC- 50/60Hz
- Dimensions:
- SRC 6032: 52" W x 25" D x 5" H
- SRC 6024: 42" W x 25" D x 5" H
- Weight:
- SRC 6032: 75 Pounds
- SRC 6024: 56 Pounds
---
Frequently Asked Questions
- How do I install the power supply unit for SRC 6032/6024?
- The mixer works efficiently with external power transformers with universal input of 100 VAC or 120 VAC or 230 VAC and 50/60 Hz.
- What would be the type of microphones suitable for use with SRC 6024/6032?
- The mixer allows low impedance microphones, which uses XLR connections.
- What’s the amount of maximum gain that can be applied to the microphone input?
- At its highest, the microphone input can be adjusted to +56dB gain.
- Is tape recording possible with a mixer?
- Sure, there are designated tape in and tape out on the SRC 6024/6032
- Can you name some of the outputs available?
- The output cabinet of the mixer provides XLR and 1/4” connectors for Master L/R, Sub, and aux sends connection balanced and unbalanced
- Using the mixer, how do I hook up some monitors?
- Monitors can be connected via the AUX Send outputs, diligently set AUX 1 and 2 for monitor feeds.
- Is there phantom power?
- Yes, the microphone inputs are capable of being powered with phantom power (+48 VDC)
- What is the frequency response of a mixer?
- It is 20 Hz to 40 kHz +/- 0.5 dB in frequency response.
User Manual
Loading...