Peavey SP SUBCOMPACT 18X DATASHEET
SP™Subcompact
18X
SPECIFICATIONS
Frequency response, 1 meter
on-axis, swept-sine in anechoic
environment:
52 Hz ~ 180 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
38 Hz
Power handling:
Sub Bass Section:
500 W continuous
1,000 W program
2,000 W peak
Transducer complement:
Sub Bass Section:
1x 18 in. dual resonant enclosure
1808-8 HE BW
Box tuning frequency:
Sub Bass Section: 36 Hz & 92 Hz
Harmonic distortion:
1% rated power
2nd Harmonic:
100 Hz: 0.10%
3rd Harmonic:
100 Hz: 0.16%
10% rated power
2nd Harmonic:
100 Hz: 0.29%
3rd Harmonic:
100 Hz: 0.80%
Impedance (Z):
Sub Bass:
Nominal: 8.0 Ω
Minimum: 6.5 Ω
Input connections:
2x 1/4" jack connectors, in parallel
Enclosure materials and finish:
3/4" plywood and MDF. Finished in
heavy-duty black carpet, with black
protective corners and black metal
grill.
Dimensions (H x W x D):
Front:
28.13 in. x 23.75 in. x 24.19 in.
714 mm x 603 mm x 614 mm
Rear:
28.13 in. x 23.75 in. x 24.19 in.
714 mm x 603 mm x 614 mm
Net weight:
102 lbs. (46.4 kg)
Additional remarks:
When used with biamplification, a
crossover frequency of 250 Hz or
below is recommended.
Features
This loudspeaker system delivers high
output, low distortion bass from a small
dual-resonant enclosure and internallymounted 18" BWX woofer. It is designed
for portability and includes handles, metal
grill, reinforcing corners, durable carpet
finish and rubber feet. A pole mount is
included for mounting of a high-pass
enclosure.
Description
The Subcompact 18X is a small,
lightweight add-on subwoofer designed to
make it easy to add more low end to the
SP-X Series or other full-range speaker
systems. Other uses include bass guitar
and drum monitoring.
The enclosure is constructed of 7-ply high
density plywood and MDF, and covered
with a heavy-duty black carpet and
reinforced with polymer corners. A black
metal grill covers the front of the
enclosure. Recessed handles on either
side ease portage.
This low frequency enclosure is comprised
of an 18" BWX Black Widow
®
woofer with
Kevlar®impregnated cone, mounted in a
dual-resonant chamber configuration.
This design provides high output and low
distortion by controlling speaker excursion
and acoustically filtering out high
frequencies.
SPECS
PEAVEY ELECTRONICS
Frequency response
This measurement is useful in
determining how accurately a given unit
reproduces an input signal. The frequency
response of the SP
™
Subcompact 18X is
measured at a distance of 1 meter using a
1 Watt (into the nominal impedance)
swept-sine input signal. The lower curve is
anechoic response, while the upper curve
is typical room response. As shown in
figure 1, the selected drivers in the SP
Subcompact 18X combine to give a
smooth frequency response from 52 Hz 180 Hz.
Power handling
There are many different approaches
to power handling ratings. Peavey rates
this loudspeaker system’s power handling
using a full-range form of the AES
Standard 2-1984. Using audio band 20 Hz
to 20 kHz pink noise with peaks of four
times the RMS level, this strenuous test
signal assures the user that every portion
of this system can withstand today’s high
technology music. This rating is contingent
upon having a minimum of 3 dB of
amplifier headroom available.
Harmonic distortion
Second and third harmonic distortions
vs. frequency are plotted in figures 5 & 6
for two power levels, ten percent (10%) of
rated input power and either one percent
(1%) of rated input power or one Watt,
whichever is greater. Distortion is read
from the graph as the difference between
the fundamental signal (frequency
response) and the desired harmonic. As
an example, a distortion curve that is
down 40 dB from the fundamental is
equivalent to 1% distortion.
Architectural and engineering
specifications
The loudspeaker system shall have an
operating bandwidth of 52 Hz - 180 Hz.
The nominal output level shall be 98.0 dB
when measured at a distance of one
meter with an input of one Watt. The
nominal impedance shall be 8 Ohms. The
maximum continuous power handling shall
be 500 Watts, maximum program power of
1000 Watts and a peak power input of at
least 2000 Watts, with a minimum
amplifier headroom of 3 dB. The outside
dimensions shall be 28.13 inches high by
23.75 inches wide by 24.19 inches deep.
The weight shall be 102 pounds. The
loudspeaker system shall be a Peavey
model SP Subcompact 18X.
3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.
Amplitude Response (1W 1m On-Axis)
120
110
100
90
dB SPL (re 20 Pa)
80
70
20 50 100 200 500 1k 2k 5k 10k 20k
Figure 1
Frequency (Hz)
Impedance
100
50
30
20
Z
(
)
10
5
3
2
1
20 50 100 200 500 1k 2k 5k 10k 20k
Figure 2
Frequency (Hz)
Loading...