Peavey SP 5 User Manual
SPECIFICATIONS SP™ 5
Frequency response, 1 meter on-axis,
swept-sine in anechoic environment:
69 Hz to 17 kHz
Usable low frequency limit
(-10 dB point):
50 Hz
Power handling:
Full range:
400 Watts continuous
800 Watts program
1,600 Watts peak
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full range:
99.0 dB SPL (2.83 V input)
Transducer complement:
Low frequency section:
1x 15" SP-15825 Scorpion
Plus HO Woofer
High frequency section:
1x .875" exit /51mm voice coil
RX™ 22 compression driver on an
asymmetrical Quadratic Throat
CD horn
Box tuning frequency:
Low Frequency Section: 54 Hz
Crossover frequency
(internal passive):
Low Frequency – High Frequency
1,800 Hz
®
Mounting provisions:
This unit is not designed for
overhead suspension
Built-in SA-1 stand-mount adapter
incorporated and four large rubber
feet on bottom for
floor use
Dimensions (H x W x D):
Front:
27.63” x 20.56” x 16.5”
702 mm x 522 mm x 419 mm
Rear:
27.63” x 14.8” x 16.5”
702 mm x 378 mm x 419 mm
Net Weight:
56 lbs. (25.5kg)
Features
• Two-way, full-range sound
reinforcement system
• 15” Scorpion Plus HO woofer
with field-replaceable basket
• Rx22 compression driver with
ferrofluid cooling
• Patented Quadratic Throat
Waveguide™ technology
• Asymmetrical horn aims the
sound down 10˚ (at the
audience, not over their heads)
• 800 Watts program, 1600
Watts peak
• Sound Guard™ III tweeter
protection
• Full-range inputs include
a Neutrik Speakon four-pin jack
and two 1/4” phone jacks
• Trapezoidal Baltic birch
enclosure, 25% lighter
than SP 5X
• Stand-mount adapter
Maximum sound pressure level
(1 meter):
Full range:
125 dB SPL continuous
131 dB SPL peak
Radiation angle measured at
-6 dB point of polar response:
90° horizontal by 40° vertical
The vertical main polar lobe is
angled down 10° with respect to
straight ahead being +10, -30°
Impedance (Z):
Full Range:
Nominal: 8.0 Ω
Minimum: 5.9 Ω
Input connections:
Full Range: two 1/4” phone jacks
and one Neutrik® four-pin
Speakon® jack
Enclosure materials and finish:
Nine-ply Baltic birch plywood
finished in black carpet
SPECIFICATIONS SP™ 5
Description
The new SP 5 features the Peavey
Quadratic Throat Waveguide™ and
an enclosure made from Baltic
birch plywood. The SP 5 is a twoway speaker system comprised of a
high output 15” Scorpion® Plus HO
woofer with a Kevlar®-impregnated
cone and an Rx™22 compression
driver loaded onto the patented
constant directivity waveguide.
The SP 5 has a trapezoidal-shaped
enclosure, which reduces the
buildup of standing waves inside
the enclosure to minimize midbass and mid-range coloration. It
is constructed of nine-ply Baltic
birch plywood and covered with
a durable black carpet. Use of the
Baltic birch plywood provides an
enclosure that is 25% lighter than
the previous SP 5XL. The enclosure
corners are reinforced with metal
corners, and a powder-coated,
perforated metal grille covers the
lower half of the system to protect
the woofer from external damage.
A built-in SA-1 stand-mount adapter
accommodates speaker stand use.
The low frequencies are supplied
by a 15” Scorpion Plus HO woofer
with a Kevlar-impregnated cone
and a highly linear suspension.
The high frequencies are
handled by a 2” Rx22 titanium
diaphragm compression driver
utilizing ferrofluid cooling.
This superb driver is coupled
to a Quadratic Throat constant
directivity waveguide (U.S. Patent
#6,059,069) to provide smooth,
even response, low distortion and
good high frequency dispersion.
This horn has an asymmetrical
vertical polar response, aiming the
main energy lobe down 10 degrees
so it is aimed at the audience
instead of over their heads. This
helps reduce ceiling reflections,
ensuring greater clarity and gain
before feedback. The Rx22 driver
features the Radialinear Planar
Phase Correction System (U.S.
Patent #6,064,745), which provides
smoother and extended high
frequency response.
features Sound Guard™ III tweeter
protection circuit and an advanced
topology crossover with high
performance components to
provide high power handling and
reliability.
Sound Guard, Peavey’s proprietary
high frequency driver protection
circuitry, provides long- and
medium-term driver overload
protection without impairing
musical transients or dynamics
when the system is used full range.
The crossover provides driver
roll-off and protection as well as
driver EQ for the woofer and horn
for a clean, clear and smooth
response. High quality, reliable
crossover components include
polypropylene capacitors and high
current inductors. The optimal
integration of the crossover with
the selected drivers results in a
smooth frequency response from
69 Hz to 17 kHz.
Despite its compact dimensions,
this system can produce very high
sound levels and handle 800 Watts
program power, resulting in clean
coverage with high articulation and
long-term reliability.
Input connection to the system
is made via two 1/4” phone jacks
and a four-pin Neutrik in parallel.
The internal passive crossover
Loading...