PEAVEY ELECTRONICS
The Scorpion®
Series Speakers
Scorpion
00013770
Scorpion
00013750
®
S - 10825 - 8 Ohm
®
S - 12825 - 8 Ohm
The Scorpion® Series 10, and 12
musical instrument loud speakers
have earned a reputation of
unequaled tonal response and
reliability. Their use in a wide range
of professional musical instrument
systems has proven the Scorpion
superiority.
Our exclusive eld replaceable
basket/cone assembly, rst
introduced in the Black Widow®
Series, exemplies the Scorpion’s
many unique capabilities and
advantages.
During modern performance
situations, damaging D.C. voltages
or other unwanted signal sources
could possibly damage any loud
speaker or cause complete failure.
Although this is not a common
occurrence, the Peavey Scorpion
Series has been designed to deal
with such incidents with our eld
replaceable basket/cone assembly.
In the event of speaker damage/
failure, the musician/sound crew
can easily remove the magnet form
the basket assembly with three
bolts, clean the gap and utilize
a new basket/cone assembly for
replacement. This unique system
saves time, money and, many
times, the performance itself! The
high power handing capability
coupled with a large 2 ½” diameter
ribbon aluminum voice coil allows
any model Scorpion to produce
very high sound pressure levels
and maintain those levels over a
long period of time.
The die cast aluminum frame and
large magnetic assembly with
vented pole piece ensures superior
cooling, long life and durability.
The unique die cast frame of the
Scorpion also incorporates a
“square frame” design allowing
these ne transducers to be
utilized in a variety of small,
compact enclosures. Because of
the Scorpion’s “adaptability” to
SPECIFICATIONS 00013770 00013750
many enclosure designs (innite
bafe, tuned and ported, etc.),
the modern musician will nd
distinct advantages for utilizing
our Scorpions over competing
transducers. For example, full range
response for guitar amplication
or excellent high end/mid range
response for bi-amped (or tri-
amped) bass and key board rigs.
Our 10” and 12”, 8 ohm
loudspeakers are now available
to discriminating musicians who
require superb sound reproduction,
outstanding durability and high
sound pressure levels.
MODEL Scorpion® S - 10825 - 8 Ohm Scorpion S - 12825 - 8 Ohm
DIAMETER 10” 12”
IMPEDANCE 8 Ohms 8 Ohms
POWER CAPACITY 800W peak 800W peak
400W program 400W program
200W continuous 200W continuous
SENSITIVITY 95.1 dB/1W 1m 94.9 dB/1W 1m
USABLE FREQ. RANGE 80 Hz ~ 4 kHz 60 Hz - 4 kHz
VOICE COIL DIAMETER 2.5” / 63.5 mm 2.5” / 63.5 mm
VOICE COIL MATERIAL Kevlar® impreganated Kevlar® impreganated
cellulose cellulose
NET WEIGHT 7.5 lbs. / 3.4 kg 7.8 lbs. / 3.54 kg
Znom (Ohms) 8 8
Revc (Ohms) 5.58 5.34
Sd (square meters) 0.031 0.050
BL (T/M) 10.60 10.51
APPLICATIONS
The S-10825 and S-12825
Scorpion® loud speakers are
ideally suited for lead and rhythm
guitar applications. The extended
bandwidth and excellent high
frequency response provide superb
performance for electric bass and
bass bi-amp congurations, and
because of their versatility, the
Scorpion Series also can be used
for many keyboard systems.
Fo (Hz) 102.0 59.4
Vas (liters) 14.6 66.6
Cms (uM/N) 104.3 187.2
Mms (gm) 23.30 38.30
Qms 7.00 5.25
Qes 0.742 0.691
Qts 0.671 0.611
Xmax (mm) 0.06 0.25
Le (mH) 0.40 0.30
SPL (1W 1m) 95.1 94.9
No (%) 2.03 1.96
Vd (cu in/ml) 1.1 / 19 0.76 / 12.5
Pmax (Watts pgm) 400 400
Disp. (cu. in /ml) 91 / 1491 126 / 2064
Peavey
Scorpion®
speakers
feature convenient
eld-replaceable
baskets. Replaceable
baskets eliminate the
need for re-coning
speakers and the
frustration and delays
associated with the
1
3
Baskets are replaced in four easy steps:
2
4
re-coning process. It
only takes a few minutes
to replace a basket
and you are back in
business. It just can’t get
any easier than the four
steps outlined here.
ONE YEAR LIMITED WARRANTY
NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained online at www.peavey.com.
1 Remove three screws on back of magnet structure.
2 Lift the magnet structure off the basket frame.
3 Clean the voice coil “gap”.
4 Align screw holes, lower structure into place on new
basket frame, insert screws and tighten.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian • MS • 39305
Logo referenced in Directive 2002/96/EC Annex IV
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
The bar is the symbol for marking of new waste and
is applied only to equipment manufactured after
13 August 2005
Features and specications subject to change without notice.
(601) 483-5365 • FAX (601) 486-1278 • www.peavey.com
©2011 Printed in the U.S.A. 10/11 80306038
Loading...