Peavey Session 115 User Manual

Session 115

OVERVIEW

The Session 115 combo amp is a highly roadworthy and very lightweight solid state design with concessions
for pedal steel, lap steel, fiddle, ukulele, banjo, accordion, or whatever application you may need for clean and
honest reproduction of any musical instrument. The Session 115 was meticulously voiced using basic and
proven Peavey pedal steel amp designs into a 500W stereo beast (250W with internal 15" Neodymium 1501-4
Black Widow speaker) that works equally well for a variety of instruments. The result is an extremely versatile
amplifier that is capable of capturing the sounds of Peavey steel guitar amps that so many pedal steel players
have clung to as a standard for over 50 years. Add a Peavey 115-N extension cabinet for vivacious stereo
imaging and a total of 500W(rms) output. With pre-EQ loop, separate mono and stereo post-EQ loops, "smart"
stereo loop switching, an added boost function, and a studio-quality digital effects section, this may be the last
amp that you will ever need. The included MIDI hand controller clips to any standard microphone stand and
can be replaced by any other standard MIDI switching device for maximum flexibility in switching your rig.

Keep your volume level in check and enjoy!

FEATURES

- DDT Compression

- High & Low (-10dBV) gain inputs

- Pre Gain

- Front end boost circuit (remote switchable)

- Pre-EQ loop for volume pedals

- Classic Peavey Low, Mid, Mid Shift, High, and Presence EQ

- Post-EQ effects loop (remote switchable)

- Spring reverb level (remote switchable)

- Digital Chorus, Reverb, and Delay

- Remote switchable Tap Tempo for Delay

- Remote switchable digital effects defeat

- All delay and reverb "tails" remain intact during any switching

- Master Gain control

- 500W(rms) Stereo Power (250W per side into 4 Ohms)

- Proprietary MIDI Remote Controller included

- MIDI protocol for remote switching to allow for numerous remote switching options

- Stereo MSDIs with ground lifts

- 1/4" Speaker outputs

- 1501 SB Neodymium Black Widow speaker

- Stereo Effects loops (rear; remote switchable) which sum to mono in tandem when only one cabinet is
used

- Weight Packed: 50.71 lb(23 kg)

- Width Packed: 24.5"(62.23 cm)

- Height Packed: 27"(68.58 cm)

- Depth Packed: 13"(33.02 cm)