Peavey Sanpera I Player`s Handbook
SANPERA I
®
SANPERATM I
Player`s Handbook
™
SANPERA I
®
Welcome
Thank you for purchasing the SanperaTM I
foot controller for your VYPYR® amplifier.
We are certain you will enjoy having the
control of your VYPYR at your feet.
™
Note:
Your SanperaTM I is powered by your VYPYR® amplier and
requires the special 8-pin MIDI cable included with your
Sanpera in order to function correctly.
™
1
3 4
2 5 6
SANPERA I
®
The Sanpera I operates in three modes, PRESET MODE, LOOPER MODE and BANK
SELECT MODE. The functions of buttons 1-4 will vary depending on which mode you are in.
PRESET MODE
When you rst plug your Sanpera I into the amplier
(using the provided 8 pin MIDI cable) the pedal will
default to PRESET mode. In this mode buttons 1-4
correspond with the four PRESET buttons on your
VYPYR®. Each button allows you to select one of the
four presets within the bank (group of four presets)
selected on the amplier. Remember, each VYPYR has
12 onboard presets, which are stored in three BANKS of
four labeled A, B and C. To change BANKS using your
Sanpera I, please see BANK SELECT mode.
To store your personal amplier settings and replace one of
the onboard presets, simply press and hold the button that
corresponds with the location you wish to store the preset.
Loading...