Specifications and Main Features
- Sixteen (16) input with equalizer, group assignment, pan. and auxiliary controls.
- Four input channel capabilities for flexibility.
- A universally designed chassis for desktop or rackmount configuration.
- All channels come equipped with low noise XLR Mic inputs with trim gain.
- Each channel along with Groups 1-4 have 60 mm faders.
- Phantom power with switches to defeat sieges for Channels 1-2 and 3-16.
- 8-track recording is optimal through channels 1-8 (including direct output, tape input, and switches for input selection).
- Channels 9-16 are enhanced for stereo use.
- Insert (in/out) connectors for Channels 1-8.
- Also have six auxiliary outputs, two of them are XLR balanced.
- There are four mono subgroups numbered one through four.
- A stereo sub group pair numbered five and six.
- Super channels 1 and 2 have phase and pad switches.
- Each of the channels has a clip led and signal present led along with a mute switch.
- Other channels have pre fader stereo mix B (Aux 1 and 2) functionality.
- Cut low frequency for channels 3-8 is enabled with switch activation.
- Master faders that are smooth on the left and right with 60 mm motion.
- All input channels and subgroups have PFL/SOLO support.
- Control room and stereo headphone outputs are available.
- There is a balanced mono output with an XLR connection supported and with a separate level control.
- XLR cables are suitable for our balanced stereo L/R output ports.
- Stereo control room outputs (1/4")
Frequently Asked Questions
Q1: How many channels does the RSM 4062 mixer have?
A1: This device is capable of handling 16 input signals.
Q2: What types of inputs are available on the RSM 4062?
A2: The mixer has XLR mic inputs and TRS 1/4 braided line socket inputs.
Q3: Does RSM 4062 have phantom power provision?
A3: This device has phantom power active with its independent defeat switches for Channels 1-2 and (3-16).
Q4: Is there a feature for low cut filtering on the channels?
A4: Yes, cut is switcheable on channels 3 through 8.
Q5: Can the device RSM 4062 be connected to an intended recording device?
A5: Channels 1-8 have been designed to suit 8 track recording purposes with direct outputs and tape inputs.
Q6: What sort of outputs does RSM 4062 send out to the speakers?
A6: The master signal from the mixer goes out through a balanced XLR and an unbalanced 1/4 jack for L/R master signals.
Q7: Can the outputs of the mixer be monitored?
A7: This equipment has stereo headphones and control room outputs for monitoring.
Q8: How can I turn off the sound for a channel?
A8: There is a mute switch for each input channel that will turn off all MIC AUX outputs and sends.
Q9 :What is the measurement of the fader on the channels?
A9: There is a 60 mm fader for each channel and it is of high quality.
Q10: Is there any signal present LED indicator or a clipping LED indicator?
A10: yes, there is a signal present LED indicator and a clip LED indicator available on each channel.
User Manual
Loading...