Peavey RQ 3014 User Manual
Specifications and Main Features
- Name: Logitec RQ™ 3014 Compact Console
- Category: Compact Mixer designed for sound recording and reinforcement purposes
- Total Number of Inputs: Twenty (Six mono and four stereos)
- Additional Input Channels:
- Six discrete low noise mic preamps with six mono inputs
- Four stereo inputs for analog tapes, CDs, or synthesizers
- Equalization Features: Low, mid, and high frequency adjustments available for all input channels’ three-band equalizer with the following exclusions:
- Equalizer controls for 4 mono channels for Low cut filters
- Controls for 2 mono channels for Mid-sweep range controls
- Auxiliary Sending Facilities Available: One pre-EQ, one post-fader and one switchable per channel: 3 auxiliary sends per channel
- Overload Detection: Automatically monitors three points for overload protection in each channel unit
- Phantom Power: 48V microphones phantom power control outcomes
- Master Control: Contains a headphone and control room level range and control for dual function
- Outputs Available Include:
- The use of balanced XLR outputs
- The use of quarter inch outputs
- RCA stereo tape outputs and inputs
- Power needs are:
- 120 Volts 60 Hz 18 W for domestic users
- 230 Vac 50/60 18 W for export users
- Frequency Response Range: ±1 dB for 20 Hz to 64 KHz
- Total Harmonic Distortion: A maximum of 0.003 percent
- S/N Ratio Measure: Master Left – Right = 102 Decibels
- Equivalent Input Noise Measure: -129 dBu
- Common Mode Rejection Ratio for The - Mic: 50 dB demin 20 Hz-20 kHz
- Dimensions: [not provided]
- Weight: [not provided]
Frequently Asked Questions
- Q: What type of Input does RQ™ 3014 Compact Console comes with?
A: The RQ™ 3014 Compact Console features six mono inputs with four stereo line inputs.
- Q: Do all mic inputs have provision for phantom power?
A: Yes, phantom power can be provided for all inputs with XLR microphones but Channel 1 has its own phantom power switch.
- Q: What course of action should I take if the Overload Indicator comes on?
A: An overload indication means that the signal level is within 2 dB of clipping. Gain or equalization boost should be turned down.
- Q: Is it possible to connect a tape recorder to the console?
A: Yes, it is recorded that a tape recorder can be connected to the tape input jacks and output jacks.
- Q: How do I avoid feedback when using tape decks?
A: When recording, do not leave the tape input connected, there is feedback which occurs when using the Record/Play switch.
- Q: What is the maximum output level of the Main L/R outputs?
A: +21 dBu is the maximum output level for the Main L/R outputs.
- Q: Is it possible for me to set the headphone level separately?
A: The answer to that question is quite simple as indeed it is wrong as there exists a dual function control for the headphone level/control room level allowing for separate adjustments.
- Q: How often should users of this console contact for maintenance?
A: It is advisable for the users to contact a service facility for maintenance as there are no user serviceable parts inside the units.
User Manual
Loading...