Peavey Kosmos V2 Specifications

Kosmos® V2

The Kosmos® v2 is a second generation subharmonic and stereo image enhancement system. As the successor to the awardwinning Kosmos®, it incorporates improved circuitry and adds features to prvide even more functionality for live sound and recording applications. Like the original Kosmos®, it can provide planet rattling bass as its subharmonic processor watches the source material, analyzes the bass, then generates additional phase-synced low frequencies an octave below it. Borrowing from the Kosmos® Pro, the damping (tracking) has two preset ranges.

Features:

• Creates intelligent, phase-synced subharmonics that don’t overpower existing material

• Dynamic source tracking yields tight, clean bass sounds

• Subharmonic activity indicator shows processing status

• A specially tuned low frequency circuit, compliments the subharmonics and can be used to fatten the low end

• High frequency image enhancement provides atmosphere through improved stereo separation and clarity

• A rear panel stereo/mono switch allows use as a channel insert or in a monophonic system

• Internal 90 Hz crossover signal can be removed from the subwoofer output when used as a side-chain effect

• Master output level controls left, right, and subwoofer output levels simultaneously

• All inputs & outputs are balanced XLR or 1/4” TRS jacks

• Signal and Peak lamps monitor signal activity and warn of overload

• Independent subwoofer output level control

Logo referenced in Directive 2002/96/EC Annex IV (OJ(L)37/38,13.02.03 and defined in EN 50419: 2005

The bar is the symbol for marking of new waste and

is applied only to equipment manufactured after

13 August 2005

Kosmos® V2

Frequency Response: Process Mode - Controlled Bypassed - <10Hz to 80Khz +0/-1 dB THD+N (10Hz -80K Hz BW): Process Mode: ≤ .003% Bypassed: ≤.001% Signal to Noise: 88 dB Crosstalk: <75 dB @ 1KHz CMRR: 60 dB Nominal Input Level: +4 dBu (1.23 VRMS) Max Output: +26 dBu Max Input: +22 dBu Input Impedance: 20K ohms balanced (Pin 2 positive), 10K ohms unbalanced Output Impedance: 200 ohms balanced (Pin 2 positive), 100 ohms unbalanced Power Requirements: 8 Watts @ 120VRMS 50/60 Hz, 8 Watts @ 230VRMS 50/60 Hz Dimensions (HxWxD): 1.75” x 19.0”x9.0” (4.45 cm x 48.6 cm x 22.86 cm) Weight: Net: 7.1 lbs (3.22 kg) Shipping Weight: 8.7 lbs (3.95 kg)

05/2011