Page 1
SPECIFICATIONS IMPULSE®5c-8c
www.peavey.com
Description
The IMPULSE is a two-way speaker
system.
The lightweight-yet-rugged molded
enclosure is designed for install
applications. These speakers work great
for music playback or speech. These units
work for 100v, 70v or standard 8 OHM
inputs. For 100v, 70v transformer
operation there are selectable power
levels. For 100v (70v) settings on the
model 8C, there is a 30W(15W), 20W
(10W), 10W(5W), and 5W(2.5W) tap
selection. On the model 5C, the taps are
15W(7.5W), 10W(5W), 7.5W(3.75W), and
5W(2.5W).
Features:
• Two-way sound reinforcement
enclosure
• 5” or 8” Woofer
•
0.75” or 1” Silk Dome Tweeter
• 100v, 70v or 8 Ohm operation.
•
50W (5c) or 70W (8c) Power
handling
• Weather Resistant
•
Durable Molded Polypropylene
Enclosure
• Includes Steel Wall mounting
Bracket
• Metal Grill
Frequency Response:
75Hz-20kHz (5c)
50
Sensitivity:
88 dB (5c)
88 dB (8c)
Power rating:
50W (5c)
70W (8c)
Max SPL:
105 dB (5
106 dB (8
Nominal impedance (Z):
8 ohms
Dispersion (Polar Coverage):
80 deg. H
50 deg. V
Dimensions (H x W x L):
5c:
10.5 in. x 7.5 in. x 8 in.
265 mm x 190 mm x 205 mm
8c:
14.65 in. x 9.25 in. x 10.55 in.
372 mm x 235 mm x 268 mm
Weight:
5c:
8c:
Hz-20kHz (8c)
c)
c)
s
5 lb
2.3 kgs
12 lbs
5.5 kgs
Mounting or suspension:
Steel Wall Mount Bracket
CAU
TION: Before attempting to suspend
this speaker, consult with a certified
structural engineer. Speaker can fall from
improper suspension, resulting in serious
injury and property damage. Do not
suspend or mount any other product or
device from this enclosure! Use only the
correct mating hardware. All associated
rigging is the responsibility of others.
DO NOT OVER TORQUE HARDWARE.
ALWAYS USE PROPER GRADE HARDWARE.
Consult Specification sheet for rigging
information. www.peavey.com/
fying_hardware. Failure to follow proper
rigging specifcations listed in the manual
may result in injury or death.
CAUTION: ALWAYS USE SAFETY CHAIN.
INSPECT RIGGING ANNUALLY.
Warranty registration and information for
U.S. customers available online at
www.peavey.com/warranty
or use the QR tag below
Features and specications subject to change without notice.
Peavey Electronics Corporation 5022 Hartley Peavey Drive
Meridian, MS 39305 (601) 483-5365 FAX (601) 486-1278
Logo referenced in Directive 2002/96/EC Annex IV
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
The bar is the symbol for marking of new waste and
is applied only to equipment manufactured after
13 August 2005
Loading...