Peavey 810 TX User Manual
810TM
TX
Bass Enclosure
SPECIFICATIONS
Frequency Response, 1 meter
on-axis, swept sine in
environment:
25Hz-15kHz
Power Handling:
400 W continuous (40 V RMS)
800 W program
Transducer Complement:
Eight
10” KevlaKB
One phenolic dome horn tweeter
Box Tuning Frequency:
35 Hz
Crossover Frequency:
3.5
kHz
Impedance, Z:
4 ohms nominal
3.8 ohms minimum
anechoic
impregnated woofers
Input Connections:
One
l/4”
phone jack
Enclosure Materials & Finish:
3/4”
plywood, carpet covered with metal
corners and an expanded metal grille
Dimensions (H x W x D):
49” x 24.5” x
(124.5 cm x 62.2 cm x 43.8 cm)
Net Weight:
148
Ibs.
17.25”
(67.3 kg)
DESCRIPTION
The 81
and badest bass box from Peavey. New
for the 810 TX. To decrease unwanted
distortion, KevlarB impregnated cones
were used in these drivers. Increased
the enclosure. The upper harmonics
OTM
TX is the newest, biggest,
IO”
drivers were developed specifically
low frequency output is accomplished
by a substantial vent at the bottom of
needed to accurately reproduce sharp,
tight transients are handled by a horn
loaded tweeter. An automatic resetting
protection device has been placed in
the signal path of the tweeter. Should
too much power start going to the
tweeter this protection device will trip
resulting in almost no output from the
tweeter. As soon as the power level of
the high frequencies returns to a
nominal level, the device will reset itself
and output from the tweeter will return.
An L-pad attenuator has also been
designed into the crossover so that the
amount of high frequency content can
be custom tailored to any style of
playing or particular sound.
The 810 TX is a 4 ohm enclosure
capable of handling up to 800 watts.
Loading...