Peavey 410TVX User Manual

P E A V E Y E L E C T R O N I C S

S P E C S

TM

410TVX

Bass Enclosure

SPECIFICATIONS

Frequency Response, 1 meter on-axis,
swept-sine in anechoic environment:
30 Hz to 15 kHz

Power Handling:
350 W continuous (37.4 V RMS)

700 W program

Sound Pressure Level, 1 watt, 1 meter in
anechoic environment:
97 dB (2.8V 8 ohm)

97 dB (2.0V 4 ohm)

Transducer Complement:
4 x 10" Sheffield® bass guitar
speakers
1 x 1" Phenolic dome horn
tweeter

Box Tuning Frequency:
50 Hz

Crossover Frequency (Internal Passive):
3,000 Hz

Impedance:
Nominal:

 8Ω(8ohm)
 4Ω(4ohm)

Minimum:

 7.6Ω(8ohm)
 4.1Ω(4ohm)

Input Connections:
1 x 1/4" phone jack

Enclosure Materials and Finish:
3/4" MDF, Tolex® covered with
metal corners and an expanded
metal grille

Dimensions (H x W x D):

28.25" x 24.50" x 19.25"
(71.8 cm x 62.2 cm x 48.9 cm)

Net Weight:
101 lbs. (45.0 kg)

Features:

• Improved crossover for better
midrange tone

• Vents located on front of
cabinet

• Horn tweeter with level
control

• Protection circuit for horn
tweeter

Description

The 410TVX™ is designed as a full-range
bass guitar enclosure. This enclosure is
covered with tough, black vinyl to give
the player a rugged and easy-to-clean
surface. The metal corners and grille add
protection from the bumps and bruises
encountered “on the road.”

The 410TVX utilizes four 10-inch
Sheffield® bass speakers, a horn tweeter
and a custom crossover designed for
great articulation, tone and clarity. A high
frequency level control is part of the
crossover so the high frequency output

can be tailored to complement any style
of playing. A protection circuit has been
incorporated into the crossover to help
prevent damage to the horn tweeter in
the event of overpowering. If the average
signal level going to the tweeter exceeds
a certain threshold, the protection circuit
is engaged.

When this occurs, the horn will almost
completely stop producing sound, until
the signal level is reduced and the circuit
disengages. Then the horn tweeter will
again produce sound. Please note that
this protection circuit is for long-term
(average signal level) protection. It is still
possible for transients (short-term peaks)
to damage the horn.

Like our earlier TXF™ series, this

Logo referenced in Directive 2002/96/EC Annex IV
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005

The bar is the symbol for marking of new waste and

is applied only to equipment manufactured after

13 August 2005

enclosure has low frequency vents on the
front of the cabinet. This results in better
low frequency impact from the enclosure.

guitar enclosure from Peavey. Be sure to
check the amplifier specifications to verify
the minimum impedance rating of the amp
used to power this enclosure.

The 410TVX is capable of handling an
input power of up to 700 watts in 8-ohm
and 4-ohm configurations. This enclosure
can be used alone or with any other bass

NOTE: For details, refer to the warranty statement

Copies of this statement may be obtained by contacting

P.O. Box 2898, Meridian, Mississippi 39301-2898

Tolex® is a registered trademark of DiversiTech
General, Inc..

3 + 2 YEAR LIMITED WARRANTY

Peavey Electronics Corporation

Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian • MS • 39305

©2006

Features and specifications subject to change without notice.

[phone] • FAX [phone] • www.peavey.com

EX000055