PEAKTECH 4145-10 Datasheet

17.9.2019 PeakTech® 4145-1000A - PeakTech® - Convincing Top Technology

BACK

4145-1000A_Front.jpg (429.4 kB)

4145-1000A_Rear.jpg (442.6 kB)

PICTURE

PeakTech

Prüf- und Messtechnik GmbH

Gerstenstieg 4

DE 22926 Ahrensburg

Phone: [phone]

Fax: [phone]

Products Current Clamp Adapters 4mm / BNC PeakTech® 4145-1000A

PeakTech® 4145-1000A PROD-ID: P 4145-1000A

1000A AC Current Clamp Adapter with BNC Plug

Professional measuring transducer that allows accurate measurements of
high currents up to 1000 A AC in conjunction with a measuring device
with BNC connection. The large opening of the round measuring tongs
with handle for one-hand operation and the high cable length allow
measurements even at large conductor diameters at more distant
measuring locations. This current clamp adapter is ideally suited as an
accessory for power meters, power analyzers and oscilloscopes.

Also suitable as an accessory for the PeakTech 4145 power
analyzer

For conductor diameters of max. 52 mm

Cable length: approx. 290cm

Power conversion: 1mV / A (1:1000)

Accuracy class: IEC 60044-1 @ 1%

ACA 0,5 ... 1000 A AC

ACA-Frequency 50/60 Hz nominal (40 ... 1 kHz max.)

Accuracy +/- 1% (48-65Hz / 25°C+/-3°C)

Burden Resistance < 10Ω

Max. non-destructive current 2000 A

Safety CAT III 600V

Dimensions (WxHxD) 110 x 215 x 45 mm

Weight ca. 700 g

EAN-13 4250569404092

https://www.peaktech.de/productdetail/kategorie/stromzangenadapter_4mm_oder_BNC/produkt/peaktech-4145-1000a.html 1/1