Telefon: +49 (0) 6135 931069
Telefax: +49 (0) 6135 931070
www.peak-electronics.de
info@peak-electronics.de
MP SERIES P8TG-XXXXZ4:1H35 3.5 KV ISOLATED 1.5 W REGULATED DUAL OUTPUT DIP24
Available Inputs:
24 and 48 VDC Wide Input 4:1
Available Outputs:
(+/-) 3.3, 5, 12, 15 and 18 VDC
Other specifications please enquire.
Electrical Specifications
(Typical at + 25° C, nominal input voltage, rated output current unless otherwise specified)
Input Specifications
Voltage range 9 - 36 VDC (24 VDC), 18 - 72 VDC (48 VDC)
Filter Pi Network
Isolation Specifications
Rated voltage 3500 Vdc
Resistance 10
9
Ohm
Capacitance 80 pF typ.
Output Specifications
Voltage accuracy +/- 1 % typ. +/-2% max.
Ripple and noise (at 20 MHz BW) 60 mV p-p, max.
Short circuit protection Continuous , restart automatic
Line voltage regulation +/- 0,5 % max.
Load voltage regulation +/- 0,5 % max.
Temperature coefficient +/- 0,02 % / °C
General Specifications
Efficiency 70 % to 85 %
Switching frequency 250 KHz, typ.
Environmental Specifications
Operating temperature (ambient) -40°C to +85°C
Storage temperature - 55 °C to + 125 °C
Derating See graph
Humidity Up to 90 %, non condensing
Cooling Free air convection
Physical Characteristics
Dimensions 31,75 x 20,32 x 10,16 mm
1,25 x 0,80 x 0,40 inches
Weight 18,5 g
Case material Non conductive black plastic
Examples of Partnumbers/Modelcode
PART
NO.
INPUT
VOLTAGE
(VDC)
Nominal
INPUT
CURRENT
NO LOAD
INPUT
CURRENT
FULL
LOAD
OUTPUT
VOLTAGE
(VDC)
OUTPUT
CURRENT
(max. mA)
EFFICIENCY FULL LOAD
(% TYP.)
P8TG-243R3Z4:1H35 9-36 6.2 72 +/- 3.3 +/- 200 76
P8TG-2405Z4:1H35 9-36 6.2 81 +/- 5 +/- 150 77
P8TG-4805Z4:1H35 18-72 5.8 41 +/- 5 +/- 150 77
P8TG-4812Z4:1H35 18-72 5.8 40 +/- 12 +/- 63 79
P8TG-4815Z4:1H35 18-72 5.8 40 +/- 15 +/- 50 79