PEAK P6CG0503ZS, P6CG053R3ZS, P6CG0505ZS, P6CG054R8ZS, P6CG1203ZS Datasheet

...
Telefon: +49 (0) 6135 931069 Telefax: +49 (0) 6135 931070
www.peak-electronics.de
info@peak-electronics.de
M2 SERIES P6CG-XXXXZS 1KV ISOLATED 0,6 – 1 W REGULATED DUAL SPLIT OUTPUT SIP7
Available Inputs:
5, 12 and 24 VDC
3.0, 3.3, 4.85 and 5 VDC
Other specifications please enquire.
Electrical Specifications
(Typical at + 25° C, nominal input voltage, rated output current unless otherwise specified)
Input Specifications
Voltage range +/- 10 % Filter Capacitors
Isolation Specifications
Rated voltage 1000 VDC Leakage current 1 mA Resistance 10
9
Ohm
Capacitance 80 pF typ.
Output Specifications
Voltage accuracy +/- 1 %, max. Ripple and noise (at 20 MHz BW) 50 mV p-p, max. Short circuit protection Momentary Line voltage regulation +/- 0,4 % Load voltage regulation +/- 0,3 % Temperature coefficient +/- 0,02 % / °C
General Specifications
Efficiency 60 % to 75 % Switching frequency 45 KHz, typ.
Environmental Specifications
Operating temperature (ambient) - 40° C to + 85° C Storage temperature - 55 °C to + 125 °C Derating See graph Humidity Up to 90 %, non condensing Cooling Free air convection
Physical Characteristics
Dimensions SIP 19,50 x 6,00 x 9,50 mm 0,76 x 0,24 x 0,37 inches Weight 2,5 g Case material Non conductive black plastic
Examples of Partnumbers/Modelcode
PART
NO.
P6CG0503ZS 5 20 196 3/3 100/100 61 P6CG053R3ZS 5 21 212 3,3/3,3 100/100 62 P6CG054R8ZS 5 21 300 4,85/4,85 100/100 64 P6CG0505ZS 5 22 313 5/5 100/100 64 P6CG1203ZS 12 18 81 3/3 100/100 62 P6CG123R3ZS 12 18 88 3,3/3,3 100/100 62 P6CG124R8ZS 12 16 123 4,85/4,85 100/100 65 P6CG1205ZS 12 15 128 5/5 100/100 65 P6CG2403ZS 24 16 40 3/3 100/100 62 P6CG243R3ZS 24 16 44 3,3/3,3 100/100 62 P6CG244R8ZS 24 15 62 4,85/4,85 100/100 65 P6CG2405ZS 24 14 64 5/5 100/100 65
INPUT
VOLTAGE
(VDC)
INPUT
CURRENT
NO LOAD
INPUT
CURRENT
FULL
LOAD
OUTPUT
VOLTAGE
(VDC)
OUTPUT
CURRENT
(max. mA)
EFFICIENCY FULL LOAD
(% TYP.)
H
M2 SERIES P6CG-XXXXZS 1KV ISOLATED 0,6 – 1 W REGULATED DUAL SPLIT OUTPUT SIP7
Dimensions
Printed Face
19,5 mm
(0,76 inch)
6,00 mm
(0,24 inch)
Peak
(0,02 inch)
0,5 mm
Modelcode
12 4
2,54 mm
(0,10 inch)
15,20 mm (0,60 inch)
MM/JJ
5
6
9,50 mm
7
(0,37 inch)
3,05 mm (0,12 inch)
0,50 mm
(0,02 inch)
(0,05 inch)
1,25 mm
Derating Graph and Pinning
Output
1.00 W
0.70 W
0.60 W
Temperature Derating Graph
Ambient Temperature ° C
0,50 mm
(0,02 inch)
85
0,25 mm
(0,01 inch)
Pin Connection # Dual Split
1 + V Input 2 - V Input 4 + V2 Output 5 Ground 6 + V1 Output 7 Omitted
- 40 0 40 80 100
Specification can be changed without notice. Copyright PEAK electronics Gmb
REV:2 / 09.2001
Loading...