Peak IPEH-004010, IPEH-004020, IPEH-004011, IPEH-004020-A Quick Start Manual
PCAN-Gateway
Quick Start Guide
© 2017-05 PEAK-System Technik GmbH - www.peak-system.com
Congratulations ...
... on your new PCAN-Gateway. This guide covers the basic configuration and
operation of the PCAN-Gateway product family.
Documentation
Detailed documentation in PDF format is available on the supplied product DVD
and on our website. See the last page of this quick start for download links.
Simplified EU Declaration of Conformity
PEAK-System Technik GmbH declares:
The product PCAN-Ethernet Gateway DR (IPEH-004010) is in compliance
with the EU EMC Directive 2014/30/EU.
The radio equipment PCAN-Wireless Gateway DR (IPEH-004011) and
PCAN-Wireless Gateway (IPEH-004020 and IPEH-004020-A) are in
compliance with the Directive 1999/5/EC.
The full texts of the EU declaration of conformity are available in the
documentation of each product. See the last page of this quick start for
download links.
© 2017-05 PEAK-System Technik GmbH - www.peak-system.com
Connectors
PCAN-Ethernet Gateway DR
(IPEH-004010)
CAN 1 & 2: High-speed CAN channels,
connectors via 4-pole screwterminal strips (Phoenix)
Power: Voltage supply (8 - 30 V)
LAN: RJ-45 connector
PCAN-Wireless Gateway DR
(IPEH-004011)
CAN 1 & 2: High-speed CAN channels,
connectors via 4-pole screwterminal strips (Phoenix)
Power: Voltage supply (8 - 30 V)
WLAN: 2.4 GHz dipole antenna
Pin Assignment CAN
1 CAN-High
2 CAN-Low
3 CAN-GND
4 CAN-Shield
1 2 3 4
Pin Assignment Power
1 GND
2 not connected
3 Vbat (8 - 30V)
4 Shield
1 2 3 4
CAN 1
CAN 2
Power
RS-232
Antenna
or RJ-45
© 2017-05 PEAK-System Technik GmbH - www.peak-system.com
PCAN-Wireless Gateway
(IPEH-004020)
CAN 1 & 2: High-speed CAN channels,
connectors via D-Sub, 9-pin
(in accordance with CiA® 303-1)
Power: Voltage supply (8 - 30 V)
WLAN: Internal chip antenna
PCAN-Wireless Gateway
(IPEH-004020-A)
CAN 1 & 2: High-speed CAN channels,
connectors via automotive
connector, 12-pin (Tyco)
Power: Voltage supply (8 - 30 V)
WLAN: Internal chip antenna
Pin Assignment D-Sub & Power
1 opt. +5V
2 CAN-Low
3 GND
4 Wake-up
6 GND
7 CAN-High
CAN 1 Power CAN 2
CAN 1, CAN 2, Power
1 Vb
2 GND
3, 9 CAN1-Low
4, 10 CAN1-High
5, 11 CAN2-Low
6, 12 CAN2-High
7 Wake-up
8 GND
Pin Assignment Tyco
Loading...