Peak C8310-A-FX User Manual

Thank You!

Thank you for purchasing the Peak Raised Toilet Seat With Swing Back Arms.

Peak Raised Toilet Seat With Swing Back Arms are designed to assist with Toilet
transfers, are available with or without Lids.

Kindly take time to go through this manual which gives you more details about your
Toilet Seat Raiser. Kindly keep this booklet handy and use it as and when required.

Peak Raised Toilet Seat With Swing Back Arms is warrantied to be free of defects in
material and workmanship for twelve months from the date of purchase. This device
was built to exacting standards and carefully inspected prior to packing and shipping.

This warranty is an expression of our condence in the materials, our workmanship

and an assurance of the same to our customers. In the event of a defect covered by
this warranty, we will at our option supply parts or replace the unit.

Peak Raised Toilet Seat With Swing Back Arms

Product Codes: C8310-A-FX

This warranty does not cover device failure due to owner’s misuse or negligence
or normal wear and tear. This warranty does not extend to nondurable components
such as clips which are subject to normal wear and need periodic replacement.

If you have any queries, please contact the distributor.

Peak Care Equipment
149 Princes Highway
Unanderra NSW 2526
Tel: [phone]
www.peak-care.com.au

Distributor:

4

User Manual

Staple Receipt Here:

INSTALLATION

• Choose the desired increased height of product, setting both the front & rear
aluminium x bars,

• ensuring all four hand wheels are tight.

• Connect both armrests, ensuring spring loaded gold button passes inside both

side panels. Conrm correct position by pulling armrest to ensure it remains in

place.

• Remove the existing toilet seat from toilet if applicable.

• Place the raised toilet seat with arms onto the toilet bowl, and connect the rear
attachment bolts through the existing toilet bowl holes located at the rear of the
bowl.

REGULAR MAINTENANCE

• For safety, precautions must be taken for the safe use of this equipment.

• The raised toilet is not designed for permanent installation. The product should

be loosened and retightened once a week to ensure a proper t.

• Regularly check products for defects. If a defect appears, do not attempt to use
the product & contact the distributor immediately.

• Regularly check correct arm rest locations and front and rear aluminium x bars
for tightness.

• Clean with warm soapy water or mild detergent only and wipe clean to remove
residue.

USE

• Check that the product sits at on the bowl and test for stability before each
use.

• Ensure even weight distribution on both armrests when lowering & raising from
toilet.

• Maximum user weight capacity: 120 kg

ABOUT

• Designed to assist users to lower onto and rise from the toilet by increasing
toilet seat height.

• Increased height option: 65 mm / 105 mm / 145 mm

• Peak Care products are manufactured using the latest materials & technology &
will last for many years if used in a safe and correct manner.

• The product information is supplied as a guide only. We recommend the correct

usage, tting and suitability of the product be advised by a

• QUALIFIED THERAPIST.

DISTRBUTOR

• Examine the product for possible shipping damage.

• Ensure customer has been assessed & advised by a health professional.

• Ensure customer has been briefed thoroughly about product capabilities &
correct usage.

2 3