PEAG JLab Audio BAND2 User Manual

OUTSIDE

n

e

g

ed

Warm-up Your Headphones

Optional: Burn-in your audio equipment with the JLab Audio App

or access the burn-in method at: jlabaudio.com/burnin

JLab Audio + Burn-in Tool

3 MONTHS

FREE

With purchase. Visit jlabaudio.com/pandoraoffer

US Compliance

QUICK START GUIDE

For full User Manual +

other JLab products visit

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop using your
product. Changes or modifications not expressly by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.

FCC ID: 2AHYVBAND

BLUETOOTH PAIRING FITTING

1 2 3

Turn on Bluetooth in
your device settings.

Settings

Bluetooth

Press and hold
button for

10 seconds.

Release.
Lights will

flash blue/red.

Settings

Bluetooth

JLab JBuds Band

Select “JLab JBuds Band” in your device's
Bluetooth settings to connect.

Lights will slow blink blue
when Bluetooth is paired.

.

EU Compliance

PEAG LLC dba JLab Audio hereby declares that this device is in compliance with

the essential requirements and other relevant provisions of the RED directive.

A copy of the EU Declaration of Conformity is available at jlabaudio.com/compliance

JLab Audio 2281 Las Palmas Drive, Suite 101, Carlsbad, CA 92011, USA

The symbol above indicates that this product and/or battery should not be disposed
of with household waste. When you decide to dispose of this product and/or its
battery, do so in accordance with local environmental laws and guidelines.

Battery Caution & Disposal Information

Please take care of your battery. Do not; disassemble, burn, puncture, crush
or bend your battery. Improper operation of the battery may product smoke.
In such an event, ventilate the area. Extinguish any flames with carbon dioxide,
dry-powder fire extinguisher, or cover with sand or mud. Take care to avoid
conditions of excessive moisture for prolonged periods and do not immerse.
Do not expose to temperatures above 50°C/122°F. Charge battery fully before
storage or if stored for longer than three months.

Disposal

At the end of its life, please take care to dispose of this product responsibly.
Electronic products and batteries contain materials that can be harmful to the
environment. Please do not dispose to unsorted waste. Take your electronic
waste to a designated collection or recycling facility to be recycled properly.
Your local council authority will be able to tell you where your nearest facilities are.
There may be one at your local supermarket.

Contact Us

If you’re unsatisfied with your purchase, please contact us and we’ll take care
of you! You can contact our US based customer support team:

Website: jlabaudio.com/contact
Email: [e-mail]
Phone U.S.: [phone] (M-F 8am-5pm PT)
Phone U.K.: [phone] (M-F 1600-0100 GMT)

Visit jlabaudio.com/warranty to initiate a return or exchange.

BUTTON FUNCTIONS

POWER ON/OFF:

Click and hold 2 seconds.

PLAY/PAUSE/ANSWER/
HANG UP CALLS:

Click once.

REJECT INCOMING CALL:

Click and hold 1 second

VOLUME DOWN:

Click once.

TRACK BACKWARD:

Click and hold 2+ seconds.

ACTIVATE SIRI (iOS) OR
“OK GOOGLE” (ANDROID):

Click twice.

BLUETOOTH PAIRING:

See Bluetooth Pairing page.

VOLUME UP:

Click once.

TRACK FORWARD:

Click and hold 2+ seconds.

EQUALIZER MODES

Quick press both buttons
for different EQ settings

(JBuds Band will cycle 3 EQ settings)

SIGNATURE
(One Beep)

JLab C3™ signature sound
with amplified vocals and bass

BALANCED
(Two Beeps)

Even sound with no additional
sound enhancements

BASS BOOST
(Three Beeps)

Amplified bass and sub-bass

GOES with

SMART ASSISTANTS

ANDROID + APPLE

JBUDSBAND

Choose ear tip size.

1

Rest the band around the neck with

3

the controls facing the right hand side.

CHARGING

Open USB door and

1

connect the cable to
a computer or USB
power source to charge.

WIRELESS

NECKBAND

INSIDE

Move the earbud to desired location from

2

the Adjustable Tip Placement.

Adjustable Tip Placeme

Light will turn solid red

2

when charging and
turn blue when

e.

fully charged.

8+ HOURS

of PLAYTIME*

CHARGING

FULLY

CHARGED

FRONTBACK

Date: 09.26.18

PROJECT: JBuds Band Wireless QSG

STOCK: 157g, MATTE

INK: 4/4 CMYK / CMYK

FLAT SIZE: 15.5” x 5.375”

FOLDED SIZE: 3.875” x 5.375”